[Sun Mar 25 08:47:58 2012] Detection parameters:
  Position = (310.6, 260.1) = 17 45 40.24 -29 4 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.7 +/- 11.9
  Background counts = 31.3
  Rate = 0.005 +/- 0.001

[Sun Mar 25 08:47:58 2012] Off-axis axis estimate = 2.92'
[Sun Mar 25 13:32:09 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 13:32:09 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Mar 25 13:32:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Sun Mar 25 13:32:09 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.89"
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Mar 25 14:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19.csv
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Mar 25 14:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19.csv
[Sun Mar 25 14:50:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Mar 25 14:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Mar 25 14:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Mar 25 14:50:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:50:36 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.249901 pixels away
[Sun Mar 25 14:50:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:36 2012] Assessing source extent using major
[Sun Mar 25 14:50:36 2012] Source does appear to be extended
[Sun Mar 25 14:50:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:36 2012] Deleting source due to low Poisson probability 0.9