[Sun Mar 25 08:47:57 2012] Detection parameters:
  Position = (324.2, 299.8) = 17 45 35.74 -29 1 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21891.3 +/- 181.3
  Background counts = 54.6
  Rate = 2 +/- 0.01

[Sun Mar 25 08:47:58 2012] Off-axis axis estimate = 1.87'
[Sun Mar 25 13:32:09 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 13:32:09 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Mar 25 13:32:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sun Mar 25 13:32:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sun Mar 25 14:50:03 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 14:50:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 14:50:03 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 14:50:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 14:50:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 14:50:04 2012] Fit fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 14:50:36 2012] Spatial fit model total counts = 23386.300000, observed total counts = 22796.000000
[Sun Mar 25 14:50:36 2012] Offset between fit and detection position for source 1 = 0.200044 pixels
[Sun Mar 25 14:50:36 2012] 23364.580000 total counts/ 6718.280000 bgd. counts: snr = 203.090060
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200044 pixels
  Position = (324.2, 299.6) = 17 45 35.75 -29 1 33.8
  Extent = 7.0 (7.0-7.1)", rotation angle = 0
  Source counts = 16646.3 +/- 152.9
  Background counts = 6718.3
  Rate = 1 +/- 0.01
[Sun Mar 25 14:50:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:36 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:36 2012] Source does appear to be extended
[Sun Mar 25 14:50:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:47:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:47:30 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Sun Mar 25 18:47:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.117
[Sun Mar 25 18:47:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.03"
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 19:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 25 19:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:44:50 2012] Warning, spatial fit 1 centroid is now closest to src. 17
[Sun Mar 25 19:44:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:50 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:50 2012] Source does appear to be extended
[Sun Mar 25 19:44:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:59:55 2012] Counts = 16646.300000, rescaling region sizes by 3.000000
[Mon Mar 26 02:59:55 2012] XMMSAS src. selection expression = ellipse(28156.917560, 26015.343400, 1265.380236, 1265.380236, 0.000000, X, Y)
[Mon Mar 26 02:59:55 2012] Writing source region out to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 02:59:55 2012] Extracting stamp from image fullrun_mos2_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (251, 227) - (397, 372)
[Mon Mar 26 02:59:55 2012] XMMSAS bgd. selection expression = annulus(28156.917560, 26015.343400, 6326.901182, 12653.802364, X, Y) && !ellipse(27075.392000, 27154.246000, 1135.576033, 1135.576033, 0.000000, X, Y) && !ellipse(26617.613312, 27358.849701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26133.454000, 27679.848000, 1135.576033, 1135.576033, 0.000000, X, Y) && !ellipse(27200.956000, 25992.660000, 1010.008029, 547.939216, 91.013000, X, Y) && !ellipse(29676.276400, 19407.088800, 447.465613, 447.465613, 0.000000, X, Y) && !ellipse(25558.139801, 29184.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26633.169128, 26233.895203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26732.392883, 25708.502075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29013.917969, 27341.228271, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 02:59:55 2012] Writing fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 03:00:06 2012] Mean detx,y = (-1045.36, -1510.64) 
[Mon Mar 26 03:00:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 03:06:37 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 03:06:37 2012] Setting source spectrum file to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 03:06:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 03:55:48 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:48 2012] Error reading totcts from fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 03:55:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:49 2012] Using photon index=1.80, rate=1.32, arf fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 03:55:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:49 2012] Updating source flux to 1.2e-11
[Mon Mar 26 04:03:06 2012] Reading fit data from xmm0504940201/analysis//spectral/fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 04:03:06 2012] Spectral fit parameter nH value = 2.4614e+23
[Mon Mar 26 04:03:06 2012] Spectral fit parameter PhoIndex value = 2.90338
[Mon Mar 26 04:03:06 2012] Failed to get F(0.3-8.0) from xmm0504940201/analysis//spectral/fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 04:03:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 04:03:06 2012] Using Nh = 2.5e+23, photon index=2.90, rate=1.32, arf fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 04:03:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 04:03:06 2012] Updating source flux to 4.1e-11