[Sun Mar 25 08:47:17 2012] Detection parameters:
  Position = (300.3, 318.0) = 17 45 43.68 -29 0 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 612.4 +/- 34.3
  Background counts = 56.6
  Rate = 0.05 +/- 0.003

[Sun Mar 25 08:47:17 2012] Off-axis axis estimate = 1.43'
[Sun Mar 25 11:54:18 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:54:18 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Mar 25 11:54:18 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun Mar 25 11:54:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.14"
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 25 13:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 25 13:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 13:32:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 25 13:32:09 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 25 13:32:09 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Mar 25 14:50:29 2012] Spatial fit model total counts = 2961.840000, observed total counts = 2961.000000
[Sun Mar 25 14:50:29 2012] Offset between fit and detection position for source 20 = 2.066795 pixels
[Sun Mar 25 14:50:29 2012] 3001.379000 total counts/ 2426.660000 bgd. counts: snr = 11.666782
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.066795 pixels
  Position = (298.9, 319.6) = 17 45 44.14 -29 0 6.9
  Extent = 14.3 (14.2-28.6)", rotation angle = 0
  Source counts = 574.7 +/- 54.8
  Background counts = 2426.7
  Rate = 0.05 +/- 0.004
[Sun Mar 25 14:50:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:29 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:29 2012] Source does appear to be extended
[Sun Mar 25 14:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 17:16:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 17:16:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 17:16:25 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Sun Mar 25 17:16:25 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.978
[Sun Mar 25 17:16:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.28"
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 25 18:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 25 18:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 18:47:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 25 18:47:30 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Mar 25 19:44:45 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Sun Mar 25 19:44:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:45 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:45 2012] Source does appear to be extended
[Sun Mar 25 19:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 01:37:38 2012] XMMSAS src. selection expression = ellipse(25955.774200, 27753.215800, 856.986025, 856.986025, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing source region out to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20_src.reg
[Mon Mar 26 01:37:38 2012] Extracting stamp from image fullrun_mos1_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (250, 270) - (348, 369)
[Mon Mar 26 01:37:38 2012] XMMSAS bgd. selection expression = annulus(25955.774200, 27753.215800, 1428.310041, 2856.620082, X, Y) && !ellipse(28175.924200, 26017.170600, 2335.087267, 2335.087267, 0.000000, X, Y) && !ellipse(27012.185560, 27349.409800, 824.744024, 824.744024, 0.000000, X, Y) && !ellipse(25547.748016, 28881.732025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.992800, 29952.162000, 1264.256036, 1264.256036, 0.000000, X, Y) && !ellipse(28117.724000, 27766.100000, 1255.080036, 1255.080036, 0.000000, X, Y) && !ellipse(29940.636000, 24868.372000, 1260.160036, 1260.160036, 0.000000, X, Y) && !ellipse(28411.969727, 28823.188629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.410200, 28758.230800, 809.848023, 809.848023, 0.000000, X, Y) && !ellipse(27827.563263, 28043.215363, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20.gif
[Mon Mar 26 01:49:43 2012] Mean detx,y = (390.98, -1255.62) 
[Mon Mar 26 01:49:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 01:49:58 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 01:49:58 2012] Setting source spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Mar 26 01:49:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Mar 26 03:55:46 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:46 2012] Error reading totcts from fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Mar 26 03:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:47 2012] Using photon index=1.80, rate=0.0454, arf fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src20.arf
[Mon Mar 26 03:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:47 2012] Updating source flux to 4.4e-13