[Sun Mar 25 08:47:16 2012] Detection parameters:
  Position = (324.1, 299.2) = 17 45 35.77 -29 1 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22089.6 +/- 177.7
  Background counts = 54.9
  Rate = 2 +/- 0.01

[Sun Mar 25 08:47:17 2012] Off-axis axis estimate = 1.86'
[Sun Mar 25 11:54:18 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:54:18 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Mar 25 11:54:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Sun Mar 25 11:54:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 13:32:08 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 13:32:08 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 14:50:29 2012] Spatial fit model total counts = 23091.100000, observed total counts = 23091.000000
[Sun Mar 25 14:50:29 2012] Offset between fit and detection position for source 2 = 0.242576 pixels
[Sun Mar 25 14:50:29 2012] 23128.960000 total counts/ 6653.160000 bgd. counts: snr = 201.991236
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.242576 pixels
  Position = (324.1, 299.4) = 17 45 35.77 -29 1 34.4
  Extent = 7.0 (6.9-7.1)", rotation angle = 0
  Source counts = 16475.8 +/- 152.1
  Background counts = 6653.2
  Rate = 1 +/- 0.01
[Sun Mar 25 14:50:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:29 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:29 2012] Source does appear to be extended
[Sun Mar 25 14:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 17:16:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 17:16:25 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Mar 25 17:16:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Sun Mar 25 17:16:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 18:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 18:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 18:47:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 18:47:30 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 19:44:45 2012] Spatial fit model total counts = 22646.900000, observed total counts = 23091.000000
[Sun Mar 25 19:44:45 2012] Offset between fit and detection position for source 2 = 0.332915 pixels
[Sun Mar 25 19:44:45 2012] 22167.910000 total counts/ 1438.110000 bgd. counts: snr = 546.637044
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.332915 pixels
  Position = (324.4, 299.6) = 17 45 35.67 -29 1 33.7
  Extent = 9.7 (9.7-9.7)", rotation angle = 0
  Source counts = 20729.8 +/- 148.9
  Background counts = 1438.1
  Rate = 2 +/- 0.01
[Sun Mar 25 19:44:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:45 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:45 2012] Source does appear to be extended
[Sun Mar 25 19:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 01:37:38 2012] Counts = 20729.800000, rescaling region sizes by 3.000000
[Mon Mar 26 01:37:38 2012] XMMSAS src. selection expression = ellipse(28175.924200, 26017.170600, 1751.315450, 1751.315450, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing source region out to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 26 01:37:38 2012] Extracting stamp from image fullrun_mos1_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (224, 199) - (425, 400)
[Mon Mar 26 01:37:38 2012] XMMSAS bgd. selection expression = annulus(28175.924200, 26017.170600, 8756.577252, 17513.154504, X, Y) && !ellipse(27012.185560, 27349.409800, 824.744024, 824.744024, 0.000000, X, Y) && !ellipse(25955.774200, 27753.215800, 1142.648033, 1142.648033, 0.000000, X, Y) && !ellipse(24243.300262, 40656.513489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.748016, 28881.732025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39057.543335, 29448.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.992800, 29952.162000, 1264.256036, 1264.256036, 0.000000, X, Y) && !ellipse(28117.724000, 27766.100000, 1255.080036, 1255.080036, 0.000000, X, Y) && !ellipse(28053.832464, 31917.925400, 307.006409, 307.006409, 0.000000, X, Y) && !ellipse(29940.636000, 24868.372000, 1260.160036, 1260.160036, 0.000000, X, Y) && !ellipse(28411.969727, 28823.188629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26881.304000, 22528.444000, 574.591217, 574.591217, 0.000000, X, Y) && !ellipse(29072.410200, 28758.230800, 809.848023, 809.848023, 0.000000, X, Y) && !ellipse(27827.563263, 28043.215363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29989.229706, 27171.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.566055, 37109.983765, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2.gif
[Mon Mar 26 01:37:52 2012] Mean detx,y = (-1259.70, 820.47) 
[Mon Mar 26 01:37:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 01:49:14 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 01:49:14 2012] Setting source spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 01:49:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 26 03:55:46 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:46 2012] Error reading totcts from fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 03:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:47 2012] Using photon index=1.80, rate=1.64, arf fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 03:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:47 2012] Updating source flux to 1.5e-11
[Mon Mar 26 03:59:15 2012] Reading fit data from xmm0504940201/analysis//spectral/fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 26 03:59:15 2012] Spectral fit parameter nH value = 2.22447e+23
[Mon Mar 26 03:59:15 2012] Spectral fit parameter PhoIndex value = 2.69739
[Mon Mar 26 03:59:15 2012] Failed to get F(0.3-8.0) from xmm0504940201/analysis//spectral/fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 03:59:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:59:15 2012] Using Nh = 2.2e+23, photon index=2.70, rate=1.64, arf fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 03:59:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:59:16 2012] Updating source flux to 5.1e-11