[Sun Mar 25 08:47:17 2012] Detection parameters:
  Position = (324.6, 320.9) = 17 45 35.62 -28 59 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.4 +/- 19.2
  Background counts = 58.2
  Rate = 0.01 +/- 0.002

[Sun Mar 25 08:47:17 2012] Off-axis axis estimate = 2.50'
[Sun Mar 25 11:54:18 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:54:18 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Mar 25 11:54:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Sun Mar 25 11:54:18 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.68"
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9.ximg exists
[Sun Mar 25 13:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9.csv
[Sun Mar 25 13:32:08 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Mar 25 13:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9.csv
[Sun Mar 25 13:32:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 13:32:09 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Mar 25 13:32:09 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Mar 25 13:32:09 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Mar 25 14:50:29 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Sun Mar 25 14:50:29 2012] Source 19 is offset by -0.026338 and -5.135705 pixels which is larger than
2 X fitted extent = 0.903720 x 0.903720, not incorporating fit results
[Sun Mar 25 14:50:29 2012] Spatial fit model total counts = 1205.790000, observed total counts = 1208.000000
[Sun Mar 25 14:50:29 2012] Offset between fit and detection position for source 19 = 1.487270 pixels
[Sun Mar 25 14:50:29 2012] Warning, changing simple spatial fit ID from 9 to 21
[Sun Mar 25 14:50:29 2012] 1120.274000 total counts/ 952.406000 bgd. counts: snr = 5.439473
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.487270 pixels
  Position = (323.7, 319.7) = 17 45 35.90 -29 0 6.3
  Extent = 15.7 (15.5-15.8)", rotation angle = 0
  Source counts = 167.9 +/- 33.5
  Background counts = 952.4
  Rate = 0.01 +/- 0.003
[Sun Mar 25 14:50:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:29 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:29 2012] Source does appear to be extended
[Sun Mar 25 14:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:29 2012] Source is confused with source 17
[Sun Mar 25 17:16:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 17:16:25 2012] Initial guess for spatial extent in simple fitting = 15.69"
[Sun Mar 25 17:16:25 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.949
[Sun Mar 25 17:16:25 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.69"
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src9.ximg exists
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Mar 25 18:47:30 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Mar 25 18:47:30 2012] fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Mar 25 18:47:30 2012] Fit fullrun_mos1_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Mar 25 19:44:45 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Sun Mar 25 19:44:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:45 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:45 2012] Source does appear to be extended
[Sun Mar 25 19:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 01:37:38 2012] XMMSAS src. selection expression = ellipse(28117.724000, 27766.100000, 941.310027, 941.310027, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing source region out to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19_src.reg
[Mon Mar 26 01:37:38 2012] Extracting stamp from image fullrun_mos1_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (270, 266) - (378, 374)
[Mon Mar 26 01:37:38 2012] XMMSAS bgd. selection expression = annulus(28117.724000, 27766.100000, 1568.850045, 3137.700090, X, Y) && !ellipse(28175.924200, 26017.170600, 2335.087267, 2335.087267, 0.000000, X, Y) && !ellipse(27012.185560, 27349.409800, 824.744024, 824.744024, 0.000000, X, Y) && !ellipse(25955.774200, 27753.215800, 1142.648033, 1142.648033, 0.000000, X, Y) && !ellipse(25547.748016, 28881.732025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.992800, 29952.162000, 1264.256036, 1264.256036, 0.000000, X, Y) && !ellipse(29940.636000, 24868.372000, 1260.160036, 1260.160036, 0.000000, X, Y) && !ellipse(28411.969727, 28823.188629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.410200, 28758.230800, 809.848023, 809.848023, 0.000000, X, Y) && !ellipse(27827.563263, 28043.215363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29989.229706, 27171.733856, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 01:37:38 2012] Writing fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19.gif
[Mon Mar 26 01:51:55 2012] Mean detx,y = (265.61, 744.20) 
[Mon Mar 26 01:51:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 01:52:14 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 01:52:15 2012] Setting source spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Mar 26 01:52:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Mar 26 03:55:46 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:46 2012] Error reading totcts from fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Mar 26 03:55:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:48 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0504940201_pi300-10000_pass1_cl_src19.arf
[Mon Mar 26 03:55:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:48 2012] Updating source flux to 1.2e-13
[Mon Mar 26 03:55:51 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Mon Mar 26 03:55:51 2012] Flag c found in src. 19 procflags, skipping spectral fitting