[Sat Mar 17 02:47:17 2012] Detection parameters:
  Position = (366.7, 251.0) = 17 46 21.27 -28 43 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8958.7 +/- 113.4
  Background counts = 14.0
  Rate = 2 +/- 0.02

[Sat Mar 17 02:47:17 2012] Off-axis axis estimate = 6.03'
[Sat Mar 17 03:15:45 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 03:15:45 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Sat Mar 17 03:15:45 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Sat Mar 17 03:15:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.44"
[Sat Mar 17 03:34:50 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 17 03:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 03:34:50 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 17 03:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 03:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 03:34:50 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 17 03:34:50 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 17 03:34:50 2012] Fit fullrun_mos2_xmm0504940101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 17 03:34:55 2012] Spatial fit model total counts = 9389.770000, observed total counts = 9423.000000
[Sat Mar 17 03:34:55 2012] Offset between fit and detection position for source 2 = 0.124725 pixels
[Sat Mar 17 03:34:55 2012] 9386.790000 total counts/ 2459.630000 bgd. counts: snr = 139.675530
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.124725 pixels
  Position = (366.6, 250.9) = 17 46 21.31 -28 43 42.8
  Extent = 6.8 (6.6-6.9)", rotation angle = 0
  Source counts = 6927.2 +/- 96.9
  Background counts = 2459.6
  Rate = 1 +/- 0.01
[Sat Mar 17 03:34:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 03:34:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 03:34:55 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 03:34:55 2012] Source does appear to be extended
[Sat Mar 17 03:34:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 04:06:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 17 04:06:29 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Sat Mar 17 04:06:29 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Sat Mar 17 04:06:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.79"
[Sat Mar 17 04:18:24 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 17 04:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 17 04:18:24 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 17 04:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 17 04:18:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 04:18:24 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 17 04:18:24 2012] fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 17 04:18:24 2012] Fit fullrun_mos2_xmm0504940101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 17 04:18:29 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Mar 17 04:18:29 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 04:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 04:18:29 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 04:18:29 2012] Source does appear to be extended
[Sat Mar 17 04:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 04:42:00 2012] Counts = 6927.160000, rescaling region sizes by 2.000000
[Sat Mar 17 04:42:00 2012] XMMSAS src. selection expression = ellipse(31845.192620, 21782.233800, 814.678823, 814.678823, 0.000000, X, Y)
[Sat Mar 17 04:42:00 2012] Writing source region out to fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 17 04:42:00 2012] Extracting stamp from image fullrun_mos2_xmm0504940101_pi300-10000_cl_sm2.00.img.gz, (320, 204) - (413, 298)
[Sat Mar 17 04:42:00 2012] XMMSAS bgd. selection expression = annulus(31845.192620, 21782.233800, 2715.596078, 5431.192156, X, Y) && !ellipse(31669.634918, 22727.018341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33163.468000, 23797.990000, 1520.080044, 1520.080044, 0.000000, X, Y)
[Sat Mar 17 04:42:00 2012] Writing fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2.gif
[Sat Mar 17 04:42:03 2012] Mean detx,y = (-4745.35, -5743.97) 
[Sat Mar 17 04:42:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 04:42:44 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 04:42:44 2012] Setting source spectrum file to fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 17 04:42:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 17 04:52:36 2012] Updating aperture counts using extracted products
[Sat Mar 17 04:52:36 2012] Error reading totcts from fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 17 04:52:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 04:52:36 2012] Using photon index=1.80, rate=1.05, arf fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 17 04:52:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 04:52:36 2012] Updating source flux to 1.3e-11
[Sat Mar 17 04:53:55 2012] Reading fit data from xmm0504940101/analysis//spectral/fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 17 04:53:55 2012] Spectral fit parameter nH value = 2.20114e+23
[Sat Mar 17 04:53:55 2012] Spectral fit parameter PhoIndex value = 1.87611
[Sat Mar 17 04:53:55 2012] Failed to get F(0.3-8.0) from xmm0504940101/analysis//spectral/fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 17 04:53:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 04:53:55 2012] Using Nh = 2.2e+23, photon index=1.88, rate=1.05, arf fullrun_mos2_xmm0504940101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 17 04:53:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 04:53:55 2012] Updating source flux to 5.2e-11