[Tue Jan  3 11:41:51 2012] Detection parameters:
  Position = (415.4, 179.3) = 14 45 11.52 -62 27 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 19.8
  Background counts = 153.7
  Rate = 0.003 +/- 0.0006

[Tue Jan  3 11:41:51 2012] Off-axis axis estimate = 12.10'
[Tue Jan  3 11:48:45 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Tue Jan  3 11:48:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.771
[Tue Jan  3 11:48:45 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 12.48"
[Tue Jan  3 19:57:12 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75.ximg exists
[Tue Jan  3 19:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75.csv
[Tue Jan  3 19:57:12 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75_1.ximg exists
[Tue Jan  3 19:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75.csv
[Tue Jan  3 19:57:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Tue Jan  3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Tue Jan  3 19:57:14 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Wed Jan  4 08:17:03 2012] Spatial fit model total counts = 1314.440000, observed total counts = 1355.000000
[Wed Jan  4 08:17:03 2012] Offset between fit and detection position for source 80 = 0.913870 pixels
[Wed Jan  4 08:17:03 2012] Warning, changing simple spatial fit ID from 75 to 73
[Wed Jan  4 08:17:03 2012] 802.520000 total counts/ 587.325000 bgd. counts: snr = 8.879590
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.913870 pixels
  Position = (414.5, 179.7) = 14 45 12.03 -62 27 57.9
  Extent = 24.5 (21.7-49.0)" x 4.1 (3.8-4.5)", rotation angle = 82 (79-84) degrees
  Source counts = 215.2 +/- 28.3
  Background counts = 587.3
  Rate = 0.009 +/- 0.001
[Wed Jan  4 08:17:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:03 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:03 2012] Source does appear to be extended
[Wed Jan  4 08:17:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.78
[Wed Jan  4 08:17:03 2012] Source is asymmetric
[Wed Jan  4 08:17:03 2012] Source is confused with source 43
[Wed Jan  4 08:18:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Wed Jan  4 08:18:20 2012] source mask rpix=3.3, npix_max = 57, mask sum = 42, frac = 0.734
[Wed Jan  4 08:18:20 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 14.28"
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69.ximg exists
[Thu Jan  5 03:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69.csv
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu Jan  5 03:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69.csv
[Thu Jan  5 03:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Thu Jan  5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Thu Jan  5 03:23:24 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Fri Jan  6 00:00:29 2012] Warning, spatial fit 69 centroid is now closest to src. 43
[Fri Jan  6 00:00:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:29 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:29 2012] Source does appear to be extended
[Fri Jan  6 00:00:29 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.78
[Fri Jan  6 00:00:29 2012] Source is asymmetric
[Fri Jan  6 00:01:54 2012] XMMSAS src. selection expression = ellipse(36017.226000, 15586.750000, 1468.878042, 244.474207, 82.004000, X, Y)
[Fri Jan  6 00:01:54 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80_src.reg
[Fri Jan  6 00:01:54 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (330, 95) - (499, 264)
[Fri Jan  6 00:01:55 2012] XMMSAS bgd. selection expression = annulus(36017.226000, 15586.750000, 2448.130070, 4896.260141, X, Y) && !ellipse(34890.766400, 21277.256000, 1285.688037, 1285.688037, 0.000000, X, Y) && !ellipse(34783.312600, 21154.286000, 1304.728038, 1304.728038, 0.000000, X, Y) && !ellipse(36141.341461, 19960.258774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34230.160000, 19181.018000, 1516.488044, 1516.488044, 0.000000, X, Y) && !ellipse(33298.188000, 15563.022000, 2055.064059, 2055.064059, 0.000000, X, Y) && !ellipse(33169.702000, 17117.050000, 2637.496076, 2637.496076, 0.000000, X, Y) && !ellipse(32967.997345, 19674.995789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.543427, 16288.694427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32512.889000, 15553.061000, 545.268016, 545.268016, 0.000000, X, Y) && !ellipse(32559.377200, 17766.722400, 1258.120036, 1258.120036, 0.000000, X, Y) && !ellipse(36440.903410, 17596.504952, 1988.432057, 770.081685, 85.041493, X, Y) && !ellipse(36309.192200, 18373.253600, 976.872028, 976.872028, 0.000000, X, Y) && !ellipse(32481.916000, 17610.890000, 1722.720050, 1722.720050, 0.000000, X, Y) && !ellipse(32336.218800, 16415.996600, 533.582415, 533.582415, 0.000000, X, Y) && !ellipse(31686.239471, 13974.070419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33304.078918, 20052.388290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35016.394928, 18335.352966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37241.596222, 17355.175888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36616.472229, 15529.516678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31436.884600, 15011.112000, 704.358420, 704.358420, 0.000000, X, Y) && !ellipse(31570.105835, 14486.853485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33634.951324, 20925.680527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35431.894000, 17693.682000, 1818.184052, 1818.184052, 0.000000, X, Y) && !ellipse(37713.500000, 16515.116000, 912.120026, 912.120026, 0.000000, X, Y) && !ellipse(35863.189972, 16744.305420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36724.173492, 15932.811646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35170.372000, 16380.364000, 1930.584056, 1930.584056, 0.000000, X, Y) && !ellipse(30764.160000, 13820.804000, 1670.336048, 1670.336048, 0.000000, X, Y)
[Fri Jan  6 00:01:55 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80.gif
[Fri Jan  6 03:31:47 2012] Mean detx,y = (7374.18, 13134.39) 
[Fri Jan  6 03:31:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 03:33:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 03:33:03 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri Jan  6 03:33:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.00856, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src80.arf
[Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:20 2012] Updating source flux to 5.8e-14
[Wed Jan 11 17:35:26 2012] Flag c found in src. 80 procflags, skipping spectral fitting