[Tue Jan 3 11:41:51 2012] Detection parameters: Position = (412.8, 193.0) = 14 45 13.18 -62 26 53.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.9 +/- 20.0 Background counts = 167.5 Rate = 0.003 +/- 0.0006 [Tue Jan 3 11:41:51 2012] Off-axis axis estimate = 11.28' [Tue Jan 3 11:48:45 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Tue Jan 3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 12.07" [Tue Jan 3 11:48:45 2012] source mask rpix=2.8, npix_max = 42, mask sum = 30, frac = 0.700 [Tue Jan 3 11:48:45 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 12.07" [Tue Jan 3 19:57:12 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71.ximg exists [Tue Jan 3 19:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71.csv [Tue Jan 3 19:57:12 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71_1.ximg exists [Tue Jan 3 19:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71.csv [Tue Jan 3 19:57:12 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src71.ximg exists [Tue Jan 3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists [Tue Jan 3 19:57:14 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly [Wed Jan 4 08:17:02 2012] Source 76 is offset by 3.402942 and 1.395855 pixels which is larger than 2 X fitted extent = 1.453113 x 1.453113, not incorporating fit results [Wed Jan 4 08:17:03 2012] Warning, spatial fit 71 centroid is now closest to src. 79 [Wed Jan 4 08:17:03 2012] Source 76 is offset by -0.192695 and 6.366455 pixels which is larger than 2 X fitted extent = 2.357324 x 2.357324, not incorporating fit results [Wed Jan 4 08:17:03 2012] Vigneting correction estimate = 1.000000 [Wed Jan 4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 4 08:17:03 2012] Assessing source extent using major [Wed Jan 4 08:17:03 2012] Source does appear to be extended [Wed Jan 4 08:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 4 08:17:03 2012] Source is confused with source 79 [Wed Jan 4 08:17:03 2012] Source is confused with source 80 [Wed Jan 4 08:18:20 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Wed Jan 4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 12.07" [Wed Jan 4 08:18:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 30, frac = 0.700 [Wed Jan 4 08:18:20 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 12.07" [Thu Jan 5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65.ximg exists [Thu Jan 5 03:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65.csv [Thu Jan 5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65_1.ximg exists [Thu Jan 5 03:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65.csv [Thu Jan 5 03:23:22 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jan 5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src65.ximg exists [Thu Jan 5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists [Thu Jan 5 03:23:24 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly [Fri Jan 6 00:00:29 2012] Source 76 is offset by 3.402942 and 3.393878 pixels which is larger than 2 X fitted extent = 1.453113 x 1.453113, not incorporating fit results [Fri Jan 6 00:00:29 2012] Warning, spatial fit 65 centroid is now closest to src. 79 [Fri Jan 6 00:00:29 2012] Vigneting correction estimate = 1.000000 [Fri Jan 6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 6 00:00:29 2012] Assessing source extent using major [Fri Jan 6 00:00:29 2012] Source does appear to be extended [Fri Jan 6 00:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jan 6 00:01:54 2012] XMMSAS src. selection expression = ellipse(35863.189972, 16744.305420, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jan 6 00:01:54 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76_src.reg [Fri Jan 6 00:01:54 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (375, 156) - (450, 231) [Fri Jan 6 00:01:54 2012] XMMSAS bgd. selection expression = annulus(35863.189972, 16744.305420, 1087.500000, 2175.000000, X, Y) && !ellipse(34230.160000, 19181.018000, 1516.488044, 1516.488044, 0.000000, X, Y) && !ellipse(33298.188000, 15563.022000, 2055.064059, 2055.064059, 0.000000, X, Y) && !ellipse(33169.702000, 17117.050000, 2637.496076, 2637.496076, 0.000000, X, Y) && !ellipse(32967.997345, 19674.995789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.543427, 16288.694427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32559.377200, 17766.722400, 1258.120036, 1258.120036, 0.000000, X, Y) && !ellipse(36440.903410, 17596.504952, 1988.432057, 770.081685, 85.041493, X, Y) && !ellipse(36309.192200, 18373.253600, 976.872028, 976.872028, 0.000000, X, Y) && !ellipse(32481.916000, 17610.890000, 1722.720050, 1722.720050, 0.000000, X, Y) && !ellipse(35016.394928, 18335.352966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37241.596222, 17355.175888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36616.472229, 15529.516678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35431.894000, 17693.682000, 1818.184052, 1818.184052, 0.000000, X, Y) && !ellipse(37713.500000, 16515.116000, 912.120026, 912.120026, 0.000000, X, Y) && !ellipse(36724.173492, 15932.811646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35170.372000, 16380.364000, 1930.584056, 1930.584056, 0.000000, X, Y) && !ellipse(36017.226000, 15586.750000, 1958.504056, 325.965609, 82.004000, X, Y) [Fri Jan 6 00:01:54 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76.gif [Fri Jan 6 03:28:50 2012] Mean detx,y = (7438.26, 12014.23) [Fri Jan 6 03:28:54 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jan 6 03:29:23 2012] Binned source spectrum to 10 counts/bin [Fri Jan 6 03:29:24 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76_src_b10.pi.gz [Fri Jan 6 03:29:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76_bgd.pi.gz [Fri Jan 6 06:04:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Jan 6 06:04:31 2012] rmf not generated due to insufficient counts [Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products [Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76_src_b10.pi.gz [Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.00322, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src76.arf [Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 11 17:23:20 2012] Updating source flux to 1.9e-14 [Wed Jan 11 17:35:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting