[Tue Jan  3 11:41:51 2012] Detection parameters:
  Position = (400.0, 267.0) = 14 45 21.40 -62 21 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 319.9 +/- 28.4
  Background counts = 132.7
  Rate = 0.02 +/- 0.002

[Tue Jan  3 11:41:51 2012] Off-axis axis estimate = 7.71'
[Tue Jan  3 11:48:45 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Tue Jan  3 11:48:45 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.097
[Tue Jan  3 11:48:45 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 10.28"
[Tue Jan  3 19:57:11 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65.ximg exists
[Tue Jan  3 19:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65.csv
[Tue Jan  3 19:57:11 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Jan  3 19:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65.csv
[Tue Jan  3 19:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Jan  3 19:57:14 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Jan  3 19:57:14 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Wed Jan  4 08:17:02 2012] Source 68 is offset by 1.509830 and -5.223087 pixels which is larger than
2 X fitted extent = 4.760736 x 4.760736, not incorporating fit results
[Wed Jan  4 08:17:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:03 2012] Assessing source extent using major
[Wed Jan  4 08:17:03 2012] Source does appear to be extended
[Wed Jan  4 08:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:03 2012] Source is confused with source 69
[Wed Jan  4 08:18:20 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Wed Jan  4 08:18:20 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.097
[Wed Jan  4 08:18:20 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 10.28"
[Thu Jan  5 03:23:21 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59.ximg exists
[Thu Jan  5 03:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59.csv
[Thu Jan  5 03:23:21 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Jan  5 03:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59.csv
[Thu Jan  5 03:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Jan  5 03:23:24 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Jan  5 03:23:24 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Jan  6 00:00:29 2012] Warning, spatial fit 59 centroid is now closest to src. 69
[Fri Jan  6 00:00:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:29 2012] Assessing source extent using major
[Fri Jan  6 00:00:29 2012] Source does appear to be extended
[Fri Jan  6 00:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 00:01:54 2012] XMMSAS src. selection expression = ellipse(34748.884796, 23177.141388, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 00:01:54 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68_src.reg
[Fri Jan  6 00:01:54 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (362, 229) - (437, 304)
[Fri Jan  6 00:01:54 2012] XMMSAS bgd. selection expression = annulus(34748.884796, 23177.141388, 1087.500000, 2175.000000, X, Y) && !ellipse(34890.766400, 21277.256000, 1285.688037, 1285.688037, 0.000000, X, Y) && !ellipse(34783.312600, 21154.286000, 1304.728038, 1304.728038, 0.000000, X, Y) && !ellipse(34910.520000, 21824.904000, 848.968024, 848.968024, 0.000000, X, Y) && !ellipse(35702.102800, 22877.380000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(36302.918200, 25984.094000, 1715.472049, 1287.920037, 93.520000, X, Y) && !ellipse(35387.150600, 24854.560600, 856.448025, 856.448025, 0.000000, X, Y) && !ellipse(36208.303955, 25445.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35494.457800, 23912.326000, 780.984822, 780.984822, 0.000000, X, Y) && !ellipse(35524.721527, 23617.058502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36275.314240, 22292.238708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33655.192200, 21474.606000, 570.932816, 570.932816, 0.000000, X, Y) && !ellipse(32451.900950, 26021.560916, 690.294099, 418.183790, 246.648174, X, Y) && !ellipse(34362.715000, 25246.380000, 1397.152040, 1397.152040, 0.000000, X, Y) && !ellipse(34369.658997, 24760.725647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36111.021027, 24143.420715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36277.178070, 23533.045410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34616.548800, 22621.960000, 1645.112047, 1645.112047, 0.000000, X, Y) && !ellipse(33634.951324, 20925.680527, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 00:01:54 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68.gif
[Fri Jan  6 03:05:54 2012] Mean detx,y = (7230.34, 5537.36) 
[Fri Jan  6 03:05:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 03:06:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 03:06:26 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Jan  6 03:06:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Fri Jan  6 05:54:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 05:54:26 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Jan 11 17:23:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:19 2012] Using photon index=1.80, rate=0.0185, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src68.arf
[Wed Jan 11 17:23:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:20 2012] Updating source flux to 7.2e-14
[Wed Jan 11 17:35:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting