[Tue Jan  3 11:41:50 2012] Detection parameters:
  Position = (421.4, 179.1) = 14 45 7.70 -62 28 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.0 +/- 23.9
  Background counts = 141.6
  Rate = 0.007 +/- 0.0007

[Tue Jan  3 11:41:51 2012] Off-axis axis estimate = 12.43'
[Tue Jan  3 11:48:45 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 11:48:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Tue Jan  3 11:48:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 32, frac = 0.690
[Tue Jan  3 11:48:45 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 12.64"
[Tue Jan  3 19:57:11 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41.ximg exists
[Tue Jan  3 19:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41.csv
[Tue Jan  3 19:57:11 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Jan  3 19:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41.csv
[Tue Jan  3 19:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 19:57:13 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Jan  3 19:57:13 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Jan  3 19:57:13 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Jan  4 08:17:02 2012] Warning, spatial fit 41 centroid is now closest to src. 76
[Wed Jan  4 08:17:03 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 21.139961 pixels away
[Wed Jan  4 08:17:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:03 2012] Assessing source extent using major
[Wed Jan  4 08:17:03 2012] Source does appear to be extended
[Wed Jan  4 08:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:03 2012] Source is confused with source 78
[Wed Jan  4 08:17:03 2012] Source is confused with source 80
[Wed Jan  4 08:18:20 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Wed Jan  4 08:18:20 2012] source mask rpix=2.9, npix_max = 46, mask sum = 32, frac = 0.690
[Wed Jan  4 08:18:20 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.64"
[Thu Jan  5 03:23:21 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jan  5 03:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37.csv
[Thu Jan  5 03:23:21 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jan  5 03:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37.csv
[Thu Jan  5 03:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 03:23:23 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jan  5 03:23:23 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jan  5 03:23:23 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Jan  6 00:00:29 2012] Warning, spatial fit 37 centroid is now closest to src. 76
[Fri Jan  6 00:00:29 2012] Source 43 is offset by 8.367214 and 4.680031 pixels which is larger than
2 X fitted extent = 7.269425 x 7.269425, not incorporating fit results
[Fri Jan  6 00:00:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:29 2012] Assessing source extent using major
[Fri Jan  6 00:00:29 2012] Source does appear to be extended
[Fri Jan  6 00:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 00:01:53 2012] XMMSAS src. selection expression = ellipse(36616.472229, 15529.516678, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 00:01:53 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43_src.reg
[Fri Jan  6 00:01:53 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (384, 142) - (459, 217)
[Fri Jan  6 00:01:53 2012] XMMSAS bgd. selection expression = annulus(36616.472229, 15529.516678, 1087.500000, 2175.000000, X, Y) && !ellipse(34230.160000, 19181.018000, 1516.488044, 1516.488044, 0.000000, X, Y) && !ellipse(33298.188000, 15563.022000, 2055.064059, 2055.064059, 0.000000, X, Y) && !ellipse(33169.702000, 17117.050000, 2637.496076, 2637.496076, 0.000000, X, Y) && !ellipse(36440.903410, 17596.504952, 1988.432057, 770.081685, 85.041493, X, Y) && !ellipse(36309.192200, 18373.253600, 976.872028, 976.872028, 0.000000, X, Y) && !ellipse(35016.394928, 18335.352966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37241.596222, 17355.175888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35431.894000, 17693.682000, 1818.184052, 1818.184052, 0.000000, X, Y) && !ellipse(37713.500000, 16515.116000, 912.120026, 912.120026, 0.000000, X, Y) && !ellipse(35863.189972, 16744.305420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36724.173492, 15932.811646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35170.372000, 16380.364000, 1930.584056, 1930.584056, 0.000000, X, Y) && !ellipse(36017.226000, 15586.750000, 1958.504056, 325.965609, 82.004000, X, Y)
[Fri Jan  6 00:01:53 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43.gif
[Fri Jan  6 02:48:13 2012] Mean detx,y = (7971.63, 13194.52) 
[Fri Jan  6 02:48:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:48:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:48:47 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jan  6 02:48:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jan  6 05:22:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 05:22:37 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jan 11 17:23:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:19 2012] Using photon index=1.80, rate=0.00704, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src43.arf
[Wed Jan 11 17:23:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:19 2012] Updating source flux to 5.5e-14
[Wed Jan 11 17:35:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting