[Tue Jan  3 11:41:50 2012] Detection parameters:
  Position = (418.3, 319.1) = 14 45 10.12 -62 17 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 564.6 +/- 37.0
  Background counts = 163.8
  Rate = 0.03 +/- 0.002

[Tue Jan  3 11:41:51 2012] Off-axis axis estimate = 8.82'
[Tue Jan  3 11:48:45 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Tue Jan  3 11:48:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Tue Jan  3 11:48:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.84"
[Tue Jan  3 19:57:10 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jan  3 19:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21.csv
[Tue Jan  3 19:57:10 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jan  3 19:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21.csv
[Tue Jan  3 19:57:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 19:57:13 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jan  3 19:57:13 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jan  3 19:57:13 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jan  4 08:17:02 2012] Spatial fit model total counts = 4459.670000, observed total counts = 4461.000000
[Wed Jan  4 08:17:02 2012] Offset between fit and detection position for source 22 = 4.377150 pixels
[Wed Jan  4 08:17:02 2012] Warning, changing simple spatial fit ID from 21 to 20
[Wed Jan  4 08:17:02 2012] 4424.636000 total counts/ 3713.270000 bgd. counts: snr = 11.673870
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.377150 pixels
  Position = (414.5, 321.2) = 14 45 12.50 -62 17 42.2
  Extent = 21.1 (19.2-22.1)", rotation angle = 0
  Source counts = 711.4 +/- 66.5
  Background counts = 3713.3
  Rate = 0.03 +/- 0.003
[Wed Jan  4 08:17:02 2012] Spatial fit model total counts = 3560.500000, observed total counts = 3537.000000
[Wed Jan  4 08:17:02 2012] Offset between fit and detection position for source 22 = 2.278269 pixels
[Wed Jan  4 08:17:02 2012] Warning, changing simple spatial fit ID from 20 to 22
[Wed Jan  4 08:17:02 2012] 3392.920000 total counts/ 1905.940000 bgd. counts: snr = 34.060460
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.278269 pixels
  Position = (415.8, 319.4) = 14 45 11.65 -62 17 50.1
  Extent = 19.5 (18.8-21.3)", rotation angle = 0
  Source counts = 1487.0 +/- 58.2
  Background counts = 1905.9
  Rate = 0.06 +/- 0.002
[Wed Jan  4 08:17:02 2012] Source 22 is offset by 0.305402 and 1.904299 pixels which is larger than
2 X fitted extent = 1.188906 x 1.188906, not incorporating fit results
[Wed Jan  4 08:17:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:03 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:03 2012] Source does appear to be extended
[Wed Jan  4 08:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:03 2012] Source is confused with source 21
[Wed Jan  4 08:17:03 2012] Source is confused with source 23
[Wed Jan  4 08:17:03 2012] Source is confused with source 25
[Wed Jan  4 08:18:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 19.46"
[Wed Jan  4 08:18:20 2012] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.010
[Wed Jan  4 08:18:20 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 19.46"
[Thu Jan  5 03:23:20 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jan  5 03:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19.csv
[Thu Jan  5 03:23:20 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jan  5 03:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19.csv
[Thu Jan  5 03:23:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jan  5 03:23:22 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jan  6 00:00:29 2012] Warning, spatial fit 19 centroid is now closest to src. 21
[Fri Jan  6 00:00:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:29 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:29 2012] Source does appear to be extended
[Fri Jan  6 00:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 00:01:52 2012] Counts = 1486.980000, rescaling region sizes by 2.000000
[Fri Jan  6 00:01:52 2012] XMMSAS src. selection expression = ellipse(36127.548000, 27740.652000, 2335.440067, 2335.440067, 0.000000, X, Y)
[Fri Jan  6 00:01:52 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22_src.reg
[Fri Jan  6 00:01:52 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (282, 185) - (550, 454)
[Fri Jan  6 00:01:52 2012] XMMSAS bgd. selection expression = annulus(36127.548000, 27740.652000, 7784.800224, 15569.600448, X, Y) && !ellipse(34890.766400, 21277.256000, 1285.688037, 1285.688037, 0.000000, X, Y) && !ellipse(34783.312600, 21154.286000, 1304.728038, 1304.728038, 0.000000, X, Y) && !ellipse(36141.341461, 19960.258774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34230.160000, 19181.018000, 1516.488044, 1516.488044, 0.000000, X, Y) && !ellipse(33298.188000, 15563.022000, 2055.064059, 2055.064059, 0.000000, X, Y) && !ellipse(33169.702000, 17117.050000, 2637.496076, 2637.496076, 0.000000, X, Y) && !ellipse(34910.520000, 21824.904000, 848.968024, 848.968024, 0.000000, X, Y) && !ellipse(32967.997345, 19674.995789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.543427, 16288.694427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32512.889000, 15553.061000, 545.268016, 545.268016, 0.000000, X, Y) && !ellipse(37598.585800, 29160.303000, 1837.384053, 767.776822, 84.517000, X, Y) && !ellipse(35702.102800, 22877.380000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(32559.377200, 17766.722400, 1258.120036, 1258.120036, 0.000000, X, Y) && !ellipse(36440.903410, 17596.504952, 1988.432057, 770.081685, 85.041493, X, Y) && !ellipse(38643.188000, 29951.384600, 1350.168039, 1350.168039, 0.000000, X, Y) && !ellipse(39749.584686, 31014.984344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38537.269104, 30787.052734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37231.624000, 28486.884000, 3113.920090, 3113.920090, 0.000000, X, Y) && !ellipse(35917.740204, 27275.529572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.625800, 27423.994000, 981.496028, 981.496028, 0.000000, X, Y) && !ellipse(36302.918200, 25984.094000, 1715.472049, 1287.920037, 93.520000, X, Y) && !ellipse(35387.150600, 24854.560600, 856.448025, 856.448025, 0.000000, X, Y) && !ellipse(36208.303955, 25445.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35494.457800, 23912.326000, 780.984822, 780.984822, 0.000000, X, Y) && !ellipse(35524.721527, 23617.058502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36275.314240, 22292.238708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36309.192200, 18373.253600, 976.872028, 976.872028, 0.000000, X, Y) && !ellipse(32481.916000, 17610.890000, 1722.720050, 1722.720050, 0.000000, X, Y) && !ellipse(32336.218800, 16415.996600, 533.582415, 533.582415, 0.000000, X, Y) && !ellipse(38944.040200, 31843.138000, 1076.072031, 1076.072031, 0.000000, X, Y) && !ellipse(31686.239471, 13974.070419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38440.968000, 29071.340600, 1909.936055, 709.364820, 82.453100, X, Y) && !ellipse(33655.192200, 21474.606000, 570.932816, 570.932816, 0.000000, X, Y) && !ellipse(33304.078918, 20052.388290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35016.394928, 18335.352966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37241.596222, 17355.175888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36616.472229, 15529.516678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31436.884600, 15011.112000, 704.358420, 704.358420, 0.000000, X, Y) && !ellipse(28779.805450, 14749.603149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31570.105835, 14486.853485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33622.809840, 42656.077180, 554.618623, 554.618623, 0.000000, X, Y) && !ellipse(39114.241486, 32472.659149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40064.540600, 30107.237600, 858.232025, 628.825618, 88.214000, X, Y) && !ellipse(31489.930200, 30030.968200, 510.935215, 510.935215, 0.000000, X, Y) && !ellipse(38821.455475, 28782.149841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.582520, 28070.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29569.184600, 27595.410400, 469.742189, 469.742189, 0.000000, X, Y) && !ellipse(23331.619438, 27119.430937, 662.851654, 362.209028, 73.512772, X, Y) && !ellipse(33802.117279, 26837.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.900950, 26021.560916, 690.294099, 418.183790, 246.648174, X, Y) && !ellipse(29150.105042, 25573.889435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34362.715000, 25246.380000, 1397.152040, 1397.152040, 0.000000, X, Y) && !ellipse(34369.658997, 24760.725647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36111.021027, 24143.420715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36277.178070, 23533.045410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34748.884796, 23177.141388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34616.548800, 22621.960000, 1645.112047, 1645.112047, 0.000000, X, Y) && !ellipse(23946.749420, 22205.279861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33634.951324, 20925.680527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35431.894000, 17693.682000, 1818.184052, 1818.184052, 0.000000, X, Y) && !ellipse(37713.500000, 16515.116000, 912.120026, 912.120026, 0.000000, X, Y) && !ellipse(35863.189972, 16744.305420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36724.173492, 15932.811646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35170.372000, 16380.364000, 1930.584056, 1930.584056, 0.000000, X, Y) && !ellipse(36017.226000, 15586.750000, 1958.504056, 325.965609, 82.004000, X, Y) && !ellipse(30764.160000, 13820.804000, 1670.336048, 1670.336048, 0.000000, X, Y)
[Fri Jan  6 00:01:52 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22.gif
[Fri Jan  6 02:01:19 2012] Mean detx,y = (9749.73, 1369.60) 
[Fri Jan  6 02:01:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:09:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:09:19 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jan  6 02:09:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jan 11 17:23:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:19 2012] Using photon index=1.80, rate=0.0592, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src22.arf
[Wed Jan 11 17:23:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:19 2012] Updating source flux to 1.9e-13
[Wed Jan 11 17:35:26 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Wed Jan 11 17:35:26 2012] Flag c found in src. 22 procflags, skipping spectral fitting