[Tue Jan  3 11:41:50 2012] Detection parameters:
  Position = (457.4, 357.1) = 14 44 45.82 -62 15 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 468.2 +/- 32.9
  Background counts = 196.7
  Rate = 0.01 +/- 0.001

[Tue Jan  3 11:41:51 2012] Off-axis axis estimate = 12.29'
[Tue Jan  3 11:48:45 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 11:48:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 11:48:45 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Tue Jan  3 11:48:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.870
[Tue Jan  3 11:48:45 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.57"
[Tue Jan  3 19:57:10 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jan  3 19:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18.csv
[Tue Jan  3 19:57:10 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jan  3 19:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18.csv
[Tue Jan  3 19:57:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 19:57:12 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jan  3 19:57:13 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jan  3 19:57:13 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jan  4 08:17:02 2012] Warning, spatial fit 18 centroid is now closest to src. 50
[Wed Jan  4 08:17:02 2012] Source 19 is offset by 1.248812 and 2.432694 pixels which is larger than
2 X fitted extent = 7.668000 x 1.071586, not incorporating fit results
[Wed Jan  4 08:17:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:03 2012] Assessing source extent using major
[Wed Jan  4 08:17:03 2012] Source does appear to be extended
[Wed Jan  4 08:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:03 2012] Source is confused with source 47
[Wed Jan  4 08:18:20 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 08:18:20 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Wed Jan  4 08:18:20 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.870
[Wed Jan  4 08:18:20 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.57"
[Thu Jan  5 03:23:20 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jan  5 03:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16.csv
[Thu Jan  5 03:23:20 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jan  5 03:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16.csv
[Thu Jan  5 03:23:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jan  5 03:23:22 2012] fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jan  5 03:23:22 2012] Fit fullrun_pn_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jan  6 00:00:29 2012] Warning, spatial fit 16 centroid is now closest to src. 36
[Fri Jan  6 00:00:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:29 2012] Assessing source extent using major
[Fri Jan  6 00:00:29 2012] Source does appear to be extended
[Fri Jan  6 00:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 00:01:52 2012] XMMSAS src. selection expression = ellipse(39749.584686, 31014.984344, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 00:01:52 2012] Writing source region out to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19_src.reg
[Fri Jan  6 00:01:52 2012] Extracting stamp from image fullrun_pn_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (420, 320) - (495, 395)
[Fri Jan  6 00:01:52 2012] XMMSAS bgd. selection expression = annulus(39749.584686, 31014.984344, 1087.500000, 2175.000000, X, Y) && !ellipse(37598.585800, 29160.303000, 1837.384053, 767.776822, 84.517000, X, Y) && !ellipse(38643.188000, 29951.384600, 1350.168039, 1350.168039, 0.000000, X, Y) && !ellipse(38537.269104, 30787.052734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37231.624000, 28486.884000, 3113.920090, 3113.920090, 0.000000, X, Y) && !ellipse(36127.548000, 27740.652000, 1556.960045, 1556.960045, 0.000000, X, Y) && !ellipse(38944.040200, 31843.138000, 1076.072031, 1076.072031, 0.000000, X, Y) && !ellipse(38440.968000, 29071.340600, 1909.936055, 709.364820, 82.453100, X, Y) && !ellipse(39114.241486, 32472.659149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40064.540600, 30107.237600, 858.232025, 628.825618, 88.214000, X, Y) && !ellipse(38821.455475, 28782.149841, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 00:01:52 2012] Writing fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19.gif
[Fri Jan  6 01:40:42 2012] Mean detx,y = (13308.37, -1609.47) 
[Fri Jan  6 01:40:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 01:41:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 01:41:37 2012] Setting source spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jan  6 01:41:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jan  6 04:33:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 04:33:17 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:18 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:18 2012] Error reading totcts from fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan 11 17:23:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:19 2012] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0504810601_pi300-10000_pass1_cl_src19.arf
[Wed Jan 11 17:23:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:19 2012] Updating source flux to 8.5e-14
[Wed Jan 11 17:35:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting