[Tue Jan  3 11:43:48 2012] Detection parameters:
  Position = (378.2, 220.1) = 14 45 34.92 -62 25 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 18.1
  Background counts = 88.8
  Rate = 0.004 +/- 0.0008

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 8.11'
[Wed Jan  4 01:37:52 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:52 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Jan  4 01:37:52 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Wed Jan  4 01:37:52 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 10.48"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed Jan  4 08:16:33 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Wed Jan  4 08:17:45 2012] Source 88 is offset by 6.114984 and -1.854440 pixels which is larger than
2 X fitted extent = 1.241945 x 1.241945, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 1025.950000, observed total counts = 1022.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 88 = 2.078311 pixels
[Wed Jan  4 08:17:45 2012] 1025.863900 total counts/ 975.590000 bgd. counts: snr = 1.609566
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 2.078311 pixels
  Position = (377.3, 222.0) = 14 45 35.48 -62 24 54.7
  Extent = 7.5 (3.4-11.7)", rotation angle = 0
  Source counts = 50.3 +/- 32.0
  Background counts = 975.6
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability