[Tue Jan  3 11:43:47 2012] Detection parameters:
  Position = (417.3, 246.2) = 14 45 10.48 -62 23 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.4 +/- 18.8
  Background counts = 96.2
  Rate = 0.005 +/- 0.0009

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 9.42'
[Wed Jan  4 01:37:50 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:51 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Wed Jan  4 01:37:51 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Wed Jan  4 01:37:51 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.14"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Jan  4 08:16:32 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Wed Jan  4 08:17:45 2012] Source 85 is offset by -4.723242 and 7.221625 pixels which is larger than
2 X fitted extent = 1.256506 x 1.256506, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 13.667072 pixels away
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 53
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 11.14"
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52.csv
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52.csv
[Thu Jan  5 23:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu Jan  5 23:59:59 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Jan  6 00:01:19 2012] Source 85 is offset by -4.722162 and -7.722743 pixels which is larger than
2 X fitted extent = 1.256506 x 1.256506, not incorporating fit results
[Fri Jan  6 00:01:19 2012] Warning, spatial fit 52 centroid is now closest to src. 82
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:24 2012] XMMSAS src. selection expression = ellipse(36259.107941, 21368.251343, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:24 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85_src.reg
[Fri Jan  6 09:28:24 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (380, 209) - (455, 284)
[Fri Jan  6 09:28:24 2012] XMMSAS bgd. selection expression = annulus(36259.107941, 21368.251343, 1087.500000, 2175.000000, X, Y) && !ellipse(34235.782740, 18784.711000, 1756.312051, 822.048024, 310.592000, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(34869.622200, 21318.154000, 1881.488054, 1881.488054, 0.000000, X, Y) && !ellipse(36139.106120, 20168.758600, 1070.584031, 1070.584031, 0.000000, X, Y) && !ellipse(35159.254089, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.746200, 20713.865000, 1721.640050, 1721.640050, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(36113.359115, 20456.929135, 1430.237604, 693.155882, 73.573375, X, Y) && !ellipse(35330.699540, 23379.929060, 992.712029, 992.712029, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(35050.666000, 20519.296000, 1742.192050, 1742.192050, 0.000000, X, Y) && !ellipse(36200.522064, 18743.699127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32850.796400, 18149.436000, 1614.976046, 1614.976046, 0.000000, X, Y) && !ellipse(35622.941681, 22744.169830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35792.329895, 21528.474396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36003.160461, 22989.383026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34619.114929, 23100.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33212.839200, 20363.568200, 981.312028, 981.312028, 0.000000, X, Y) && !ellipse(34543.420044, 23502.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.263000, 21484.933800, 1630.984047, 542.351216, -0.000000, X, Y)
[Fri Jan  6 09:28:24 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85.gif
[Fri Jan  6 11:44:14 2012] Mean detx,y = (-8321.75, -7598.66) 
[Fri Jan  6 11:44:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:44:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:44:36 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Jan  6 11:44:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Fri Jan  6 15:27:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 15:27:37 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.00501, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src85.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 8.6e-14
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting