[Tue Jan  3 11:43:45 2012] Detection parameters:
  Position = (387.9, 490.8) = 14 45 29.41 -62 5 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 13.5
  Background counts = 34.3
  Rate = 0.002 +/- 0.0004

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 15.38'
[Wed Jan  4 01:37:52 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 01:37:52 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Wed Jan  4 01:37:52 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.140
[Wed Jan  4 01:37:52 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 14.12"
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87.ximg exists
[Wed Jan  4 08:16:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87.csv
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87_1.ximg exists
[Wed Jan  4 08:16:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87.csv
[Wed Jan  4 08:16:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Wed Jan  4 08:16:33 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 12.705264 pixels away
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Thu Jan  5 10:04:52 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.140
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 14.12"
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src80.ximg exists
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src80_1.ximg exists
[Thu Jan  5 23:59:56 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src80 appears to have run properly
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Fri Jan  6 00:00:00 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Fri Jan  6 00:01:19 2012] Warning: source 80 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 18.542401 pixels away
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:27 2012] XMMSAS src. selection expression = ellipse(33702.824493, 42653.145966, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:27 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67_src.reg
[Fri Jan  6 09:28:27 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (350, 453) - (425, 528)
[Fri Jan  6 09:28:27 2012] XMMSAS bgd. selection expression = annulus(33702.824493, 42653.145966, 1087.500000, 2175.000000, X, Y)
[Fri Jan  6 09:28:27 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67.gif
[Fri Jan  6 12:27:47 2012] Mean detx,y = (-8817.70, 13846.47) 
[Fri Jan  6 12:27:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:28:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:28:25 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jan  6 12:28:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Wed Jan 11 17:22:41 2012] Not generating rmf since there are only 72 counts
[Wed Jan 11 17:22:41 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.00201, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src67.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 6e-14
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting