[Tue Jan  3 11:43:45 2012] Detection parameters:
  Position = (418.2, 200.0) = 14 45 9.81 -62 26 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.9 +/- 22.8
  Background counts = 103.9
  Rate = 0.004 +/- 0.0006

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 11.24'
[Wed Jan  4 01:37:51 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:51 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Wed Jan  4 01:37:51 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.842
[Wed Jan  4 01:37:51 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 12.05"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed Jan  4 08:16:32 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 61 centroid is now closest to src. 89
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 1440.510000, observed total counts = 1440.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 60 = 1.412288 pixels
[Wed Jan  4 08:17:45 2012] Warning, changing simple spatial fit ID from 61 to 63
[Wed Jan  4 08:17:45 2012] 1328.911000 total counts/ 748.800000 bgd. counts: snr = 21.199625
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.412288 pixels
  Position = (419.6, 199.9) = 14 45 8.93 -62 26 29.8
  Extent = 21.0 (15.3-23.8)", rotation angle = 0
  Source counts = 580.1 +/- 36.5
  Background counts = 748.8
  Rate = 0.02 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 58
[Wed Jan  4 08:17:45 2012] Source is confused with source 89
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 21.00"
[Thu Jan  5 10:04:52 2012] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.969
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 21.00"
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src58.ximg exists
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src58_1.ximg exists
[Thu Jan  5 23:59:55 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src58 appears to have run properly
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Thu Jan  5 23:59:59 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Fri Jan  6 00:01:19 2012] Warning, spatial fit 58 centroid is now closest to src. 56
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:25 2012] XMMSAS src. selection expression = ellipse(36456.000000, 17345.920000, 1260.132036, 1260.132036, 0.000000, X, Y)
[Fri Jan  6 09:28:25 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60_src.reg
[Fri Jan  6 09:28:25 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (347, 128) - (492, 272)
[Fri Jan  6 09:28:25 2012] XMMSAS bgd. selection expression = annulus(36456.000000, 17345.920000, 2100.220060, 4200.440121, X, Y) && !ellipse(34235.782740, 18784.711000, 1756.312051, 822.048024, 310.592000, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(33878.056427, 18316.790329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34869.622200, 21318.154000, 1881.488054, 1881.488054, 0.000000, X, Y) && !ellipse(36139.106120, 20168.758600, 1070.584031, 1070.584031, 0.000000, X, Y) && !ellipse(32869.457480, 14874.755720, 937.112027, 937.112027, 0.000000, X, Y) && !ellipse(33782.695740, 17427.719254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.746200, 20713.865000, 1721.640050, 1721.640050, 0.000000, X, Y) && !ellipse(36113.359115, 20456.929135, 1430.237604, 693.155882, 73.573375, X, Y) && !ellipse(32561.857513, 14221.962540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35050.666000, 20519.296000, 1742.192050, 1742.192050, 0.000000, X, Y) && !ellipse(32555.614000, 13519.121800, 969.416028, 969.416028, 0.000000, X, Y) && !ellipse(32446.078000, 13133.394000, 1051.656030, 1051.656030, 0.000000, X, Y) && !ellipse(36200.522064, 18743.699127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32850.796400, 18149.436000, 1614.976046, 1614.976046, 0.000000, X, Y) && !ellipse(32071.785262, 12025.951944, 2040.968059, 816.633521, 112.116304, X, Y) && !ellipse(32891.731628, 15442.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35792.329895, 21528.474396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34871.478000, 13187.411400, 2061.976059, 2061.976059, 0.000000, X, Y) && !ellipse(36259.107941, 21368.251343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32474.007904, 16750.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33212.839200, 20363.568200, 981.312028, 981.312028, 0.000000, X, Y) && !ellipse(36233.096619, 17703.988327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.263000, 21484.933800, 1630.984047, 542.351216, -0.000000, X, Y) && !ellipse(32093.324493, 15015.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37000.965607, 17316.796112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.011993, 12688.649933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36516.870200, 15512.644200, 1187.424034, 1187.424034, 0.000000, X, Y)
[Fri Jan  6 09:28:25 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60.gif
[Fri Jan  6 12:03:16 2012] Mean detx,y = (-8061.73, -11505.49) 
[Fri Jan  6 12:03:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:04:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:04:11 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri Jan  6 12:04:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.0179, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src60.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 3.4e-13
[Wed Jan 11 17:27:00 2012] Flag c found in src. 60 procflags, skipping spectral fitting