[Tue Jan 3 11:43:45 2012] Detection parameters: Position = (376.1, 204.1) = 14 45 36.19 -62 26 14.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 150.5 +/- 21.3 Background counts = 91.9 Rate = 0.007 +/- 0.001 [Tue Jan 3 11:43:48 2012] Off-axis axis estimate = 8.86' [Wed Jan 4 01:37:49 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting [Wed Jan 4 01:37:49 2012] Initial guess for spatial extent in simple fitting = 10.86" [Wed Jan 4 01:37:49 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003 [Wed Jan 4 01:37:49 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.86" [Wed Jan 4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45.ximg exists [Wed Jan 4 08:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45.csv [Wed Jan 4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45_1.ximg exists [Wed Jan 4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45.csv [Wed Jan 4 08:16:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src45.ximg exists [Wed Jan 4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists [Wed Jan 4 08:16:32 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly [Wed Jan 4 08:17:45 2012] Warning, spatial fit 45 centroid is now closest to src. 57 [Wed Jan 4 08:17:45 2012] Spatial fit model total counts = 1200.950000, observed total counts = 1196.000000 [Wed Jan 4 08:17:45 2012] Offset between fit and detection position for source 59 = 6.603094 pixels [Wed Jan 4 08:17:45 2012] Warning, changing simple spatial fit ID from 45 to 50 [Wed Jan 4 08:17:45 2012] 1215.190014 total counts/ 1215.190000 bgd. counts: snr = 0.000000 Spatial fit parameters: Offset between fit and detection position for source 59 = 6.603094 pixels Position = (379.3, 198.3) = 14 45 34.17 -62 26 37.6 Extent = 22.4 (2.8-42.0)", rotation angle = 0 Source counts = 0.0 +/- 34.9 Background counts = 1215.2 Rate = 4e-10 +/- 0.001 Deleting source due to low Poisson probability