[Tue Jan  3 11:43:45 2012] Detection parameters:
  Position = (381.7, 211.0) = 14 45 32.71 -62 25 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.1 +/- 24.0
  Background counts = 96.8
  Rate = 0.01 +/- 0.001

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 8.75'
[Wed Jan  4 01:37:48 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:48 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Wed Jan  4 01:37:48 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Wed Jan  4 01:37:48 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.80"
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jan  4 08:16:28 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src33 appears to have run properly
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jan  4 08:16:31 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 33 centroid is now closest to src. 88
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 1364.410000, observed total counts = 1362.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 57 = 3.965661 pixels
[Wed Jan  4 08:17:45 2012] Warning, changing simple spatial fit ID from 33 to 45
[Wed Jan  4 08:17:45 2012] 1333.882000 total counts/ 838.767000 bgd. counts: snr = 17.095642
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 3.965661 pixels
  Position = (378.2, 209.2) = 14 45 34.92 -62 25 50.3
  Extent = 20.2 (17.1-21.7)", rotation angle = 0
  Source counts = 495.1 +/- 36.5
  Background counts = 838.8
  Rate = 0.02 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 7
[Wed Jan  4 08:17:45 2012] Source is confused with source 36
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 20.19"
[Thu Jan  5 10:04:52 2012] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.946
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 20.19"
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33.csv
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33.csv
[Thu Jan  5 23:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jan  5 23:59:58 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 33 centroid is now closest to src. 90
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:23 2012] XMMSAS src. selection expression = ellipse(32850.796400, 18149.436000, 1211.232035, 1211.232035, 0.000000, X, Y)
[Fri Jan  6 09:28:23 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57_src.reg
[Fri Jan  6 09:28:23 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (309, 140) - (448, 279)
[Fri Jan  6 09:28:23 2012] XMMSAS bgd. selection expression = annulus(32850.796400, 18149.436000, 2018.720058, 4037.440116, X, Y) && !ellipse(34235.782740, 18784.711000, 1756.312051, 822.048024, 310.592000, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(33878.056427, 18316.790329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34869.622200, 21318.154000, 1881.488054, 1881.488054, 0.000000, X, Y) && !ellipse(36139.106120, 20168.758600, 1070.584031, 1070.584031, 0.000000, X, Y) && !ellipse(32869.457480, 14874.755720, 937.112027, 937.112027, 0.000000, X, Y) && !ellipse(33782.695740, 17427.719254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.254089, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.746200, 20713.865000, 1721.640050, 1721.640050, 0.000000, X, Y) && !ellipse(36113.359115, 20456.929135, 1430.237604, 693.155882, 73.573375, X, Y) && !ellipse(32561.857513, 14221.962540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35050.666000, 20519.296000, 1742.192050, 1742.192050, 0.000000, X, Y) && !ellipse(32555.614000, 13519.121800, 969.416028, 969.416028, 0.000000, X, Y) && !ellipse(32446.078000, 13133.394000, 1051.656030, 1051.656030, 0.000000, X, Y) && !ellipse(36200.522064, 18743.699127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32891.731628, 15442.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35622.941681, 22744.169830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35792.329895, 21528.474396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34871.478000, 13187.411400, 2061.976059, 2061.976059, 0.000000, X, Y) && !ellipse(36003.160461, 22989.383026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36259.107941, 21368.251343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32474.007904, 16750.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36456.000000, 17345.920000, 1680.176048, 1680.176048, 0.000000, X, Y) && !ellipse(33212.839200, 20363.568200, 981.312028, 981.312028, 0.000000, X, Y) && !ellipse(36233.096619, 17703.988327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.263000, 21484.933800, 1630.984047, 542.351216, -0.000000, X, Y) && !ellipse(32093.324493, 15015.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37000.965607, 17316.796112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36516.870200, 15512.644200, 1187.424034, 1187.424034, 0.000000, X, Y)
[Fri Jan  6 09:28:23 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57.gif
[Fri Jan  6 11:17:20 2012] Mean detx,y = (-4887.32, -10354.12) 
[Fri Jan  6 11:17:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:17:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:17:50 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Fri Jan  6 11:17:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src57.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 2.3e-13
[Wed Jan 11 17:27:00 2012] Flag c found in src. 57 procflags, skipping spectral fitting