[Tue Jan  3 11:43:44 2012] Detection parameters:
  Position = (456.2, 342.7) = 14 44 46.52 -62 16 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.7 +/- 18.0
  Background counts = 83.6
  Rate = 0.003 +/- 0.0005

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 11.88'
[Wed Jan  4 01:37:52 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:52 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Jan  4 01:37:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 48, frac = 1.073
[Wed Jan  4 01:37:52 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 12.37"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Wed Jan  4 08:16:33 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 74 centroid is now closest to src. 25
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 12
[Wed Jan  4 08:17:45 2012] Source is confused with source 26
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 48, frac = 1.073
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 12.37"
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jan  5 23:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70.csv
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jan  5 23:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70.csv
[Thu Jan  5 23:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Jan  6 00:00:00 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Fri Jan  6 00:01:19 2012] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 19.290437 pixels away
[Fri Jan  6 00:01:19 2012] Warning, spatial fit 70 centroid is now closest to src. 25
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:26 2012] XMMSAS src. selection expression = ellipse(39644.318085, 29769.629578, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:26 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46_src.reg
[Fri Jan  6 09:28:26 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (419, 305) - (494, 380)
[Fri Jan  6 09:28:26 2012] XMMSAS bgd. selection expression = annulus(39644.318085, 29769.629578, 1087.500000, 2175.000000, X, Y) && !ellipse(37833.592000, 29021.742000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(41033.941833, 32492.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(41793.608600, 31464.036000, 939.208027, 939.208027, 0.000000, X, Y) && !ellipse(39113.354706, 32549.041687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(41099.436096, 30614.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y) && !ellipse(41184.130000, 32756.874000, 2104.488061, 2104.488061, 0.000000, X, Y) && !ellipse(39548.057343, 32377.402008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:26 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46.gif
[Fri Jan  6 12:21:22 2012] Mean detx,y = (-12857.07, 289.16) 
[Fri Jan  6 12:21:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:21:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:21:45 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Jan  6 12:21:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed Jan 11 17:09:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 11 17:09:13 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.00306, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src46.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 6.2e-14
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting