[Tue Jan  3 11:43:43 2012] Detection parameters:
  Position = (496.6, 369.0) = 14 44 21.48 -62 14 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 18.6
  Background counts = 76.7
  Rate = 0.003 +/- 0.0005

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 15.25'
[Wed Jan  4 01:37:52 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 01:37:52 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Wed Jan  4 01:37:52 2012] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.952
[Wed Jan  4 01:37:52 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 14.05"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Wed Jan  4 08:16:33 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Wed Jan  4 08:16:33 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 73 centroid is now closest to src. 45
[Wed Jan  4 08:17:45 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 13.083717 pixels away
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Thu Jan  5 10:04:52 2012] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.952
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 14.05"
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69.ximg exists
[Thu Jan  5 23:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69.csv
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu Jan  5 23:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69.csv
[Thu Jan  5 23:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri Jan  6 00:00:00 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri Jan  6 00:00:00 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Fri Jan  6 00:01:19 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 16.918382 pixels away
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:26 2012] XMMSAS src. selection expression = ellipse(43158.241394, 32055.155792, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:26 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41_src.reg
[Fri Jan  6 09:28:26 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (459, 332) - (534, 407)
[Fri Jan  6 09:28:26 2012] XMMSAS bgd. selection expression = annulus(43158.241394, 32055.155792, 1087.500000, 2175.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(41033.941833, 32492.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(41793.608600, 31464.036000, 939.208027, 939.208027, 0.000000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(41099.436096, 30614.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y) && !ellipse(41184.130000, 32756.874000, 2104.488061, 2104.488061, 0.000000, X, Y)
[Fri Jan  6 09:28:26 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41.gif
[Fri Jan  6 12:20:44 2012] Mean detx,y = (-16586.74, 2024.36) 
[Fri Jan  6 12:20:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:21:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:21:16 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jan  6 12:21:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Jan 11 17:09:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 11 17:09:08 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.00324, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src41.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 1.1e-13
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting