[Tue Jan  3 11:43:41 2012] Detection parameters:
  Position = (435.2, 333.1) = 14 44 59.61 -62 16 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 701.8 +/- 36.5
  Background counts = 78.1
  Rate = 0.03 +/- 0.002

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 10.23'
[Wed Jan  4 01:37:45 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 01:37:45 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Wed Jan  4 01:37:45 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.905
[Wed Jan  4 01:37:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.54"
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 08:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan  4 08:16:30 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Wed Jan  4 08:17:45 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.129311 pixels away
[Wed Jan  4 08:17:45 2012] Source 3 is offset by -4.239628 and 7.510380 pixels which is larger than
2 X fitted extent = 1.303646 x 1.303646, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 5
[Wed Jan  4 08:17:45 2012] Source is confused with source 6
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.905
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.54"
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 23:59:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 23:59:56 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 23:59:56 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Fri Jan  6 00:01:18 2012] Spatial fit model total counts = 3108.200000, observed total counts = 3105.000000
[Fri Jan  6 00:01:18 2012] Offset between fit and detection position for source 3 = 2.499058 pixels
[Fri Jan  6 00:01:18 2012] Warning, changing simple spatial fit ID from 1 to 5
[Fri Jan  6 00:01:18 2012] 2335.124000 total counts/ 1799.680000 bgd. counts: snr = 12.621658
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.499058 pixels
  Position = (434.7, 335.5) = 14 44 59.94 -62 16 39.6
  Extent = 16.3 (12.5-19.3)", rotation angle = 0
  Source counts = 535.4 +/- 48.3
  Background counts = 1799.7
  Rate = 0.02 +/- 0.001
[Fri Jan  6 00:01:18 2012] Spatial fit model total counts = 2829.270000, observed total counts = 2827.000000
[Fri Jan  6 00:01:18 2012] Offset between fit and detection position for source 3 = 1.576060 pixels
[Fri Jan  6 00:01:18 2012] Warning, changing simple spatial fit ID from 5 to 12
[Fri Jan  6 00:01:18 2012] 2774.863000 total counts/ 2246.710000 bgd. counts: snr = 11.142592
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.576060 pixels
  Position = (435.4, 334.1) = 14 44 59.47 -62 16 45.6
  Extent = 22.6 (22.5-45.2)", rotation angle = 0
  Source counts = 528.2 +/- 52.7
  Background counts = 2246.7
  Rate = 0.02 +/- 0.002
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:20 2012] XMMSAS src. selection expression = ellipse(37833.592000, 29021.742000, 1356.672039, 1356.672039, 0.000000, X, Y)
[Fri Jan  6 09:28:20 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_src.reg
[Fri Jan  6 09:28:20 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (357, 256) - (513, 412)
[Fri Jan  6 09:28:20 2012] XMMSAS bgd. selection expression = annulus(37833.592000, 29021.742000, 2261.120065, 4522.240130, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.631900, 26805.606000, 774.556822, 774.556822, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(35727.064000, 27433.410000, 1734.712050, 1734.712050, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(36340.035889, 27791.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(35790.188740, 25357.514000, 1688.808049, 1688.808049, 0.000000, X, Y) && !ellipse(36079.444763, 26576.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(36100.274000, 25663.488000, 1538.024044, 1538.024044, 0.000000, X, Y) && !ellipse(37097.680359, 26587.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(41033.941833, 32492.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(41793.608600, 31464.036000, 939.208027, 939.208027, 0.000000, X, Y) && !ellipse(39113.354706, 32549.041687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(41099.436096, 30614.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43158.241394, 32055.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39644.318085, 29769.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y) && !ellipse(41184.130000, 32756.874000, 2104.488061, 2104.488061, 0.000000, X, Y) && !ellipse(39548.057343, 32377.402008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:20 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3.gif
[Fri Jan  6 09:28:37 2012] Mean detx,y = (-10995.29, -212.65) 
[Fri Jan  6 09:28:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 09:29:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 09:29:08 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 09:29:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 2.5e-13
[Wed Jan 11 17:27:00 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Jan 11 17:27:00 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Jan 11 17:35:26 2012] Reading fit data from xmm0504810601/analysis//spectral/fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_pl.csv
[Wed Jan 11 17:35:26 2012] Spectral fit parameter nH value = 4.09383e+21
[Wed Jan 11 17:35:26 2012] Spectral fit parameter PhoIndex value = 2.804
[Wed Jan 11 17:35:26 2012] Failed to get F(0.3-8.0) from xmm0504810601/analysis//spectral/fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jan 11 17:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:35:26 2012] Using Nh = 4.1e+21, photon index=2.80, rate=0.0163, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src3.arf
[Wed Jan 11 17:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:35:26 2012] Updating source flux to 2.2e-13