[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (410.2, 317.0) = 14 45 15.13 -62 17 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 352.6 +/- 27.7
  Background counts = 69.5
  Rate = 0.01 +/- 0.001

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 8.22'
[Wed Jan  4 01:37:46 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:46 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Wed Jan  4 01:37:46 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Wed Jan  4 01:37:46 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.54"
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16.csv
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16.csv
[Wed Jan  4 08:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jan  4 08:16:30 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 14.362250 pixels away
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 2150.830000, observed total counts = 2147.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 29 = 1.484473 pixels
[Wed Jan  4 08:17:45 2012] Warning, changing simple spatial fit ID from 16 to 19
[Wed Jan  4 08:17:45 2012] 2237.378000 total counts/ 1482.560000 bgd. counts: snr = 19.603612
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.484473 pixels
  Position = (411.2, 315.9) = 14 45 14.49 -62 18 5.4
  Extent = 21.7 (21.6-43.4)", rotation angle = 0
  Source counts = 754.8 +/- 47.3
  Background counts = 1482.6
  Rate = 0.02 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 15
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 21.68"
[Thu Jan  5 10:04:52 2012] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.006
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 21.68"
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16.csv
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16.csv
[Thu Jan  5 23:59:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jan  5 23:59:57 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 16 centroid is now closest to src. 48
[Fri Jan  6 00:01:18 2012] Spatial fit model total counts = 2150.160000, observed total counts = 2147.000000
[Fri Jan  6 00:01:18 2012] Offset between fit and detection position for source 29 = 0.055773 pixels
[Fri Jan  6 00:01:18 2012] Warning, changing simple spatial fit ID from 16 to 19
[Fri Jan  6 00:01:18 2012] 2242.914000 total counts/ 1476.400000 bgd. counts: snr = 19.948860
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.055773 pixels
  Position = (411.2, 315.9) = 14 45 14.51 -62 18 5.6
  Extent = 21.7 (21.6-43.4)", rotation angle = 0
  Source counts = 766.5 +/- 47.4
  Background counts = 1476.4
  Rate = 0.02 +/- 0.001
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:21 2012] XMMSAS src. selection expression = ellipse(35727.064000, 27433.410000, 1301.034037, 1301.034037, 0.000000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29_src.reg
[Fri Jan  6 09:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (336, 241) - (486, 391)
[Fri Jan  6 09:28:21 2012] XMMSAS bgd. selection expression = annulus(35727.064000, 27433.410000, 2168.390062, 4336.780125, X, Y) && !ellipse(37833.592000, 29021.742000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(34869.622200, 21318.154000, 1881.488054, 1881.488054, 0.000000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.631900, 26805.606000, 774.556822, 774.556822, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(35159.254089, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36340.035889, 27791.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(35790.188740, 25357.514000, 1688.808049, 1688.808049, 0.000000, X, Y) && !ellipse(35330.699540, 23379.929060, 992.712029, 992.712029, 0.000000, X, Y) && !ellipse(36079.444763, 26576.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(35622.941681, 22744.169830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36100.274000, 25663.488000, 1538.024044, 1538.024044, 0.000000, X, Y) && !ellipse(37097.680359, 26587.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(36003.160461, 22989.383026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(34619.114929, 23100.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(32427.015600, 25998.675000, 297.023209, 297.023209, 0.000000, X, Y) && !ellipse(34543.420044, 23502.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39113.354706, 32549.041687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.263000, 21484.933800, 1630.984047, 542.351216, -0.000000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(39644.318085, 29769.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y) && !ellipse(41184.130000, 32756.874000, 2104.488061, 2104.488061, 0.000000, X, Y) && !ellipse(39548.057343, 32377.402008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29.gif
[Fri Jan  6 10:43:04 2012] Mean detx,y = (-8900.31, -1644.32) 
[Fri Jan  6 10:43:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 10:44:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 10:44:04 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan  6 10:44:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.0236, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src29.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 3.1e-13
[Wed Jan 11 17:27:00 2012] Flag c found in src. 29 procflags, skipping spectral fitting