[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (418.3, 320.0) = 14 45 10.12 -62 17 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.6 +/- 26.3
  Background counts = 72.5
  Rate = 0.01 +/- 0.001

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 8.83'
[Wed Jan  4 01:37:47 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:47 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Jan  4 01:37:47 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed Jan  4 01:37:47 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.84"
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19.csv
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19.csv
[Wed Jan  4 08:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jan  4 08:16:31 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 19 centroid is now closest to src. 29
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 29
[Wed Jan  4 08:17:45 2012] Source is confused with source 27
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.84"
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jan  5 23:59:54 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src19 appears to have run properly
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jan  5 23:59:57 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 19 centroid is now closest to src. 29
[Fri Jan  6 00:01:19 2012] Source 28 is offset by 1.403355 and 2.842508 pixels which is larger than
2 X fitted extent = 1.276414 x 1.276414, not incorporating fit results
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:21 2012] XMMSAS src. selection expression = ellipse(36340.035889, 27791.906219, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28_src.reg
[Fri Jan  6 09:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (381, 283) - (456, 358)
[Fri Jan  6 09:28:21 2012] XMMSAS bgd. selection expression = annulus(36340.035889, 27791.906219, 1087.500000, 2175.000000, X, Y) && !ellipse(37833.592000, 29021.742000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.631900, 26805.606000, 774.556822, 774.556822, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(35727.064000, 27433.410000, 1734.712050, 1734.712050, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(35790.188740, 25357.514000, 1688.808049, 1688.808049, 0.000000, X, Y) && !ellipse(36079.444763, 26576.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(36100.274000, 25663.488000, 1538.024044, 1538.024044, 0.000000, X, Y) && !ellipse(37097.680359, 26587.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28.gif
[Fri Jan  6 10:45:57 2012] Mean detx,y = (-9380.02, -1222.32) 
[Fri Jan  6 10:45:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 10:46:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 10:46:22 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jan  6 10:46:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Jan  6 13:47:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 13:47:40 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src28.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 2.1e-13
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting