[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (447.3, 358.0) = 14 44 52.17 -62 15 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.3 +/- 25.7
  Background counts = 71.4
  Rate = 0.007 +/- 0.0007

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 11.62'
[Wed Jan  4 01:37:50 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:50 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Wed Jan  4 01:37:50 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Wed Jan  4 01:37:50 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 12.24"
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47.csv
[Wed Jan  4 08:16:29 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Jan  4 08:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47.csv
[Wed Jan  4 08:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Jan  4 08:16:32 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Jan  4 08:16:32 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed Jan  4 08:17:45 2012] Source 26 is offset by -3.139955 and -2.379976 pixels which is larger than
2 X fitted extent = 1.362152 x 1.362152, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 2426.520000, observed total counts = 2426.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 26 = 3.020586 pixels
[Wed Jan  4 08:17:45 2012] Warning, changing simple spatial fit ID from 47 to 28
[Wed Jan  4 08:17:45 2012] 1942.431000 total counts/ 751.521000 bgd. counts: snr = 43.441857
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.020586 pixels
  Position = (447.9, 355.1) = 14 44 51.80 -62 15 14.4
  Extent = 24.1 (24.0-48.2)", rotation angle = 0
  Source counts = 1190.9 +/- 44.1
  Background counts = 751.5
  Rate = 0.04 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 8
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 24.08"
[Thu Jan  5 10:04:52 2012] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.988
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 24.08"
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src44.ximg exists
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu Jan  5 23:59:55 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src44 appears to have run properly
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu Jan  5 23:59:59 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Jan  5 23:59:59 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Jan  6 00:01:19 2012] Spatial fit model total counts = 6077.300000, observed total counts = 6073.000000
[Fri Jan  6 00:01:19 2012] Offset between fit and detection position for source 26 = 1.776024 pixels
[Fri Jan  6 00:01:19 2012] Warning, changing simple spatial fit ID from 44 to 42
[Fri Jan  6 00:01:19 2012] 5570.980000 total counts/ 2728.100000 bgd. counts: snr = 54.428753
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.776024 pixels
  Position = (446.9, 353.6) = 14 44 52.40 -62 15 20.8
  Extent = 48.3 (47.5-96.6)" x 28.1 (25.0-30.9)", rotation angle = 341 (336-345) degrees
  Source counts = 2842.9 +/- 74.6
  Background counts = 2728.1
  Rate = 0.09 +/- 0.002
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Fri Jan  6 00:01:19 2012] Source is asymmetric
[Fri Jan  6 09:28:23 2012] Counts = 2842.880000, rescaling region sizes by 2.000000
[Fri Jan  6 09:28:23 2012] XMMSAS src. selection expression = ellipse(38829.498000, 30712.586000, 5797.560167, 3377.916097, 340.956000, X, Y)
[Fri Jan  6 09:28:23 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26_src.reg
[Fri Jan  6 09:28:23 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (114, 20) - (595, 595)
[Fri Jan  6 09:28:24 2012] XMMSAS bgd. selection expression = annulus(38829.498000, 30712.586000, 19325.200556, 38650.401112, X, Y) && !ellipse(37833.592000, 29021.742000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(34235.782740, 18784.711000, 1756.312051, 822.048024, 310.592000, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(33878.056427, 18316.790329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34869.622200, 21318.154000, 1881.488054, 1881.488054, 0.000000, X, Y) && !ellipse(36139.106120, 20168.758600, 1070.584031, 1070.584031, 0.000000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.631900, 26805.606000, 774.556822, 774.556822, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(32869.457480, 14874.755720, 937.112027, 937.112027, 0.000000, X, Y) && !ellipse(33782.695740, 17427.719254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35727.064000, 27433.410000, 1734.712050, 1734.712050, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(35159.254089, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36340.035889, 27791.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.746200, 20713.865000, 1721.640050, 1721.640050, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(35790.188740, 25357.514000, 1688.808049, 1688.808049, 0.000000, X, Y) && !ellipse(36113.359115, 20456.929135, 1430.237604, 693.155882, 73.573375, X, Y) && !ellipse(35330.699540, 23379.929060, 992.712029, 992.712029, 0.000000, X, Y) && !ellipse(36079.444763, 26576.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32561.857513, 14221.962540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(35050.666000, 20519.296000, 1742.192050, 1742.192050, 0.000000, X, Y) && !ellipse(32555.614000, 13519.121800, 969.416028, 969.416028, 0.000000, X, Y) && !ellipse(32446.078000, 13133.394000, 1051.656030, 1051.656030, 0.000000, X, Y) && !ellipse(36200.522064, 18743.699127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32850.796400, 18149.436000, 1614.976046, 1614.976046, 0.000000, X, Y) && !ellipse(32071.785262, 12025.951944, 2040.968059, 816.633521, 112.116304, X, Y) && !ellipse(31935.151123, 11253.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32891.731628, 15442.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35622.941681, 22744.169830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.955288, 19820.824400, 392.608811, 392.608811, 0.000000, X, Y) && !ellipse(36100.274000, 25663.488000, 1538.024044, 1538.024044, 0.000000, X, Y) && !ellipse(37097.680359, 26587.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35792.329895, 21528.474396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40062.468000, 31445.360000, 1770.096051, 1770.096051, 0.000000, X, Y) && !ellipse(39096.716000, 30825.604000, 1979.208057, 1979.208057, 0.000000, X, Y) && !ellipse(34871.478000, 13187.411400, 2061.976059, 2061.976059, 0.000000, X, Y) && !ellipse(36003.160461, 22989.383026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26515.169006, 33478.251495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.941833, 32492.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40388.400000, 31183.072000, 2088.208060, 2088.208060, 0.000000, X, Y) && !ellipse(34619.114929, 23100.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36259.107941, 21368.251343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32474.007904, 16750.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y) && !ellipse(41793.608600, 31464.036000, 939.208027, 939.208027, 0.000000, X, Y) && !ellipse(36456.000000, 17345.920000, 1680.176048, 1680.176048, 0.000000, X, Y) && !ellipse(33212.839200, 20363.568200, 981.312028, 981.312028, 0.000000, X, Y) && !ellipse(36233.096619, 17703.988327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32427.015600, 25998.675000, 297.023209, 297.023209, 0.000000, X, Y) && !ellipse(34543.420044, 23502.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39113.354706, 32549.041687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.263000, 21484.933800, 1630.984047, 542.351216, -0.000000, X, Y) && !ellipse(40264.698000, 31370.416000, 2208.208064, 2208.208064, 0.000000, X, Y) && !ellipse(41099.436096, 30614.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32093.324493, 15015.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43158.241394, 32055.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39644.318085, 29769.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.310242, 11612.356812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37000.965607, 17316.796112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40500.604000, 32057.004000, 2127.720061, 2127.720061, 0.000000, X, Y) && !ellipse(33121.011993, 12688.649933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36516.870200, 15512.644200, 1187.424034, 1187.424034, 0.000000, X, Y) && !ellipse(27120.010161, 27734.119143, 1221.536035, 523.692956, 84.285089, X, Y) && !ellipse(23296.679600, 27303.350200, 1221.536035, 451.524013, 82.395919, X, Y) && !ellipse(41184.130000, 32756.874000, 2104.488061, 2104.488061, 0.000000, X, Y) && !ellipse(33702.824493, 42653.145966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39548.057343, 32377.402008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:24 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26.gif
[Fri Jan  6 11:25:06 2012] Mean detx,y = (-12322.70, 935.22) 
[Fri Jan  6 11:25:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:38:37 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:38:37 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jan  6 11:38:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jan 11 17:23:22 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:22 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jan 11 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:23 2012] Using photon index=1.80, rate=0.0876, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src26.arf
[Wed Jan 11 17:23:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:23 2012] Updating source flux to 1.3e-12
[Wed Jan 11 17:27:00 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Wed Jan 11 17:27:00 2012] Flag c found in src. 26 procflags, skipping spectral fitting