[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (373.4, 148.9) = 14 45 37.81 -62 30 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.2 +/- 28.4
  Background counts = 71.4
  Rate = 0.01 +/- 0.0008

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 12.12'
[Wed Jan  4 01:37:48 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 01:37:48 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Wed Jan  4 01:37:48 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924
[Wed Jan  4 01:37:48 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.49"
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src31.ximg exists
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Jan  4 08:16:28 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src31 appears to have run properly
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Jan  4 08:16:31 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 31 centroid is now closest to src. 19
[Wed Jan  4 08:17:45 2012] Source 21 is offset by 2.592066 and 2.180719 pixels which is larger than
2 X fitted extent = 1.469798 x 1.469798, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 1419.070000, observed total counts = 1413.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 21 = 2.581325 pixels
[Wed Jan  4 08:17:45 2012] Warning, changing simple spatial fit ID from 31 to 79
[Wed Jan  4 08:17:45 2012] 1357.386000 total counts/ 1092.500000 bgd. counts: snr = 8.013981
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.581325 pixels
  Position = (373.5, 151.5) = 14 45 37.73 -62 30 1.2
  Extent = 13.1 (10.2-25.4)", rotation angle = 0
  Source counts = 264.9 +/- 36.8
  Background counts = 1092.5
  Rate = 0.008 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 20
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Thu Jan  5 10:04:52 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 13.15"
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31.csv
[Thu Jan  5 23:59:55 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jan  5 23:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31.csv
[Thu Jan  5 23:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jan  5 23:59:58 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 31 centroid is now closest to src. 19
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:22 2012] XMMSAS src. selection expression = ellipse(32446.078000, 13133.394000, 788.742023, 788.742023, 0.000000, X, Y)
[Fri Jan  6 09:28:22 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21_src.reg
[Fri Jan  6 09:28:22 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (328, 106) - (419, 197)
[Fri Jan  6 09:28:22 2012] XMMSAS bgd. selection expression = annulus(32446.078000, 13133.394000, 1314.570038, 2629.140076, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(32869.457480, 14874.755720, 937.112027, 937.112027, 0.000000, X, Y) && !ellipse(32561.857513, 14221.962540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32555.614000, 13519.121800, 969.416028, 969.416028, 0.000000, X, Y) && !ellipse(32071.785262, 12025.951944, 2040.968059, 816.633521, 112.116304, X, Y) && !ellipse(31935.151123, 11253.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32891.731628, 15442.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34871.478000, 13187.411400, 2061.976059, 2061.976059, 0.000000, X, Y) && !ellipse(36456.000000, 17345.920000, 1680.176048, 1680.176048, 0.000000, X, Y) && !ellipse(32093.324493, 15015.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.310242, 11612.356812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.011993, 12688.649933, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:22 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21.gif
[Fri Jan  6 11:16:19 2012] Mean detx,y = (-3475.14, -15157.02) 
[Fri Jan  6 11:16:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:16:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:16:45 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jan  6 11:16:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.00816, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src21.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 1.9e-13
[Wed Jan 11 17:27:00 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Wed Jan 11 17:27:00 2012] Flag c found in src. 21 procflags, skipping spectral fitting