[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (374.8, 164.0) = 14 45 36.91 -62 29 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.4 +/- 30.0
  Background counts = 86.3
  Rate = 0.01 +/- 0.0008

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 11.21'
[Wed Jan  4 01:37:47 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 01:37:47 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Wed Jan  4 01:37:47 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.844
[Wed Jan  4 01:37:47 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.03"
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jan  4 08:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26.csv
[Wed Jan  4 08:16:28 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jan  4 08:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26.csv
[Wed Jan  4 08:16:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jan  4 08:16:31 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jan  4 08:16:31 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jan  4 08:17:45 2012] Warning, spatial fit 26 centroid is now closest to src. 20
[Wed Jan  4 08:17:45 2012] Source 19 is offset by -6.020006 and 6.176604 pixels which is larger than
2 X fitted extent = 1.043963 x 1.043963, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Source 19 is offset by -4.878994 and -4.960362 pixels which is larger than
2 X fitted extent = 1.651926 x 1.651926, not incorporating fit results
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 20
[Thu Jan  5 10:04:52 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.844
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.03"
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jan  5 23:59:54 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src26 appears to have run properly
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jan  5 23:59:58 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jan  5 23:59:58 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 26 centroid is now closest to src. 62
[Fri Jan  6 00:01:18 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.256478 pixels away
[Fri Jan  6 00:01:19 2012] Source 19 is offset by -4.879937 and 0.739937 pixels which is larger than
2 X fitted extent = 1.338952 x 1.338952, not incorporating fit results
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:22 2012] XMMSAS src. selection expression = ellipse(32561.857513, 14221.962540, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 09:28:22 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19_src.reg
[Fri Jan  6 09:28:22 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (337, 127) - (412, 202)
[Fri Jan  6 09:28:22 2012] XMMSAS bgd. selection expression = annulus(32561.857513, 14221.962540, 1087.500000, 2175.000000, X, Y) && !ellipse(33664.924000, 16649.417800, 2609.728075, 1237.880036, 292.430000, X, Y) && !ellipse(32869.457480, 14874.755720, 937.112027, 937.112027, 0.000000, X, Y) && !ellipse(32555.614000, 13519.121800, 969.416028, 969.416028, 0.000000, X, Y) && !ellipse(32446.078000, 13133.394000, 1051.656030, 1051.656030, 0.000000, X, Y) && !ellipse(32071.785262, 12025.951944, 2040.968059, 816.633521, 112.116304, X, Y) && !ellipse(31935.151123, 11253.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32891.731628, 15442.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34871.478000, 13187.411400, 2061.976059, 2061.976059, 0.000000, X, Y) && !ellipse(32474.007904, 16750.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32093.324493, 15015.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.310242, 11612.356812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.011993, 12688.649933, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 09:28:22 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19.gif
[Fri Jan  6 11:12:15 2012] Mean detx,y = (-3760.31, -14109.94) 
[Fri Jan  6 11:12:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:12:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:12:36 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jan  6 11:12:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jan  6 14:13:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 14:13:12 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src19.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 2.6e-13
[Wed Jan 11 17:27:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting