[Tue Jan  3 11:43:42 2012] Detection parameters:
  Position = (407.1, 309.9) = 14 45 17.09 -62 18 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 441.2 +/- 29.4
  Background counts = 70.6
  Rate = 0.02 +/- 0.001

[Tue Jan  3 11:43:48 2012] Off-axis axis estimate = 7.92'
[Wed Jan  4 01:37:46 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 01:37:46 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed Jan  4 01:37:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.079
[Wed Jan  4 01:37:46 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.39"
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11.csv
[Wed Jan  4 08:16:27 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jan  4 08:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11.csv
[Wed Jan  4 08:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jan  4 08:16:30 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jan  4 08:16:30 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jan  4 08:17:45 2012] Spatial fit model total counts = 1858.190000, observed total counts = 1858.000000
[Wed Jan  4 08:17:45 2012] Offset between fit and detection position for source 15 = 1.225871 pixels
[Wed Jan  4 08:17:45 2012] 1904.027000 total counts/ 1655.020000 bgd. counts: snr = 6.120825
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.225871 pixels
  Position = (406.9, 308.7) = 14 45 17.21 -62 18 37.1
  Extent = 9.7 (7.5-12.7)", rotation angle = 0
  Source counts = 249.0 +/- 43.6
  Background counts = 1655.0
  Rate = 0.008 +/- 0.001
[Wed Jan  4 08:17:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:45 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:45 2012] Source does appear to be extended
[Wed Jan  4 08:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:45 2012] Source is confused with source 29
[Thu Jan  5 10:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:04:52 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Thu Jan  5 10:04:52 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Thu Jan  5 10:04:52 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.68"
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 23:59:54 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jan  5 23:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 23:59:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jan  5 23:59:57 2012] fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jan  5 23:59:57 2012] Fit fullrun_mos2_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jan  6 00:01:18 2012] Warning, spatial fit 11 centroid is now closest to src. 74
[Fri Jan  6 00:01:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:01:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:01:19 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:01:19 2012] Source does appear to be extended
[Fri Jan  6 00:01:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 09:28:21 2012] XMMSAS src. selection expression = ellipse(35347.631900, 26805.606000, 580.917617, 580.917617, 0.000000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing source region out to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15_src.reg
[Fri Jan  6 09:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (373, 275) - (440, 342)
[Fri Jan  6 09:28:21 2012] XMMSAS bgd. selection expression = annulus(35347.631900, 26805.606000, 968.196028, 1936.392056, X, Y) && !ellipse(37833.592000, 29021.742000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(38114.060000, 29470.432000, 1846.792053, 1846.792053, 0.000000, X, Y) && !ellipse(38231.300000, 30329.902000, 3180.136092, 3180.136092, 0.000000, X, Y) && !ellipse(37097.451400, 29004.973000, 1814.672052, 871.488025, 309.520000, X, Y) && !ellipse(37120.542816, 27534.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37596.732000, 28836.774000, 3912.624113, 3912.624113, 0.000000, X, Y) && !ellipse(35727.064000, 27433.410000, 1734.712050, 1734.712050, 0.000000, X, Y) && !ellipse(36591.288000, 27984.288000, 1808.896052, 1808.896052, 0.000000, X, Y) && !ellipse(36340.035889, 27791.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.776000, 24879.096000, 2555.800074, 2555.800074, 0.000000, X, Y) && !ellipse(35790.188740, 25357.514000, 1688.808049, 1688.808049, 0.000000, X, Y) && !ellipse(36079.444763, 26576.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35472.841600, 24165.652400, 1670.568048, 1670.568048, 0.000000, X, Y) && !ellipse(38523.852000, 30443.985200, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(36100.274000, 25663.488000, 1538.024044, 1538.024044, 0.000000, X, Y) && !ellipse(37097.680359, 26587.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38829.498000, 30712.586000, 3865.040111, 2251.944065, 340.956000, X, Y) && !ellipse(39927.068000, 31827.132000, 3853.392111, 3344.352096, 141.045000, X, Y)
[Fri Jan  6 09:28:21 2012] Writing fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15.gif
[Fri Jan  6 10:26:21 2012] Mean detx,y = (-8329.82, -2088.41) 
[Fri Jan  6 10:26:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 10:26:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 10:26:51 2012] Setting source spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jan  6 10:26:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jan 11 17:23:21 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:21 2012] Error reading totcts from fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jan 11 17:23:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:22 2012] Using photon index=1.80, rate=0.00767, arf fullrun_mos2_xmm0504810601_pi300-10000_pass1_cl_src15.arf
[Wed Jan 11 17:23:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:22 2012] Updating source flux to 1.2e-13
[Wed Jan 11 17:27:00 2012] Flag c found in src. 15 procflags, skipping spectral fitting