[Tue Jan  3 11:42:30 2012] Detection parameters:
  Position = (469.2, 372.0) = 14 44 38.56 -62 14 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.9 +/- 23.9
  Background counts = 73.6
  Rate = 0.006 +/- 0.0007

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 13.48'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Tue Jan  3 19:57:14 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.125
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 13.17"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36.csv
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36.csv
[Wed Jan  4 01:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed Jan  4 01:37:43 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1726.740000, observed total counts = 1725.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 8 = 4.726274 pixels
[Wed Jan  4 08:17:22 2012] 1533.134000 total counts/ 659.322000 bgd. counts: snr = 34.030570
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.726274 pixels
  Position = (472.6, 375.3) = 14 44 36.48 -62 13 45.5
  Extent = 26.3 (26.3-52.7)", rotation angle = 0
  Source counts = 873.8 +/- 39.2
  Background counts = 659.3
  Rate = 0.03 +/- 0.001
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 47
[Wed Jan  4 08:17:22 2012] Source is confused with source 36
[Wed Jan  4 08:17:22 2012] Source is confused with source 37
[Wed Jan  4 08:17:22 2012] Source is confused with source 48
[Wed Jan  4 08:17:22 2012] Source is confused with source 49
[Thu Jan  5 03:23:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 26.34"
[Thu Jan  5 03:23:24 2012] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.983
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 26.34"
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32.csv
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32.csv
[Thu Jan  5 10:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 32 centroid is now closest to src. 36
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:11 2012] XMMSAS src. selection expression = ellipse(41065.816000, 32604.606000, 1580.310045, 1580.310045, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8_src.reg
[Fri Jan  6 06:15:11 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (382, 285) - (563, 466)
[Fri Jan  6 06:15:11 2012] XMMSAS bgd. selection expression = annulus(41065.816000, 32604.606000, 2633.850076, 5267.700152, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(38860.252000, 31890.520000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41819.444000, 32994.472000, 1476.992042, 1476.992042, 0.000000, X, Y) && !ellipse(38821.126251, 29249.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41986.999115, 32360.893036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42164.890000, 31413.766000, 1112.384032, 1112.384032, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8.gif
[Fri Jan  6 07:20:33 2012] Mean detx,y = (2778.15, 14421.49) 
[Fri Jan  6 07:20:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:21:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:21:42 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jan  6 07:21:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.0274, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src8.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 4.8e-13
[Wed Jan 11 17:23:25 2012] Flag c found in src. 8 procflags, skipping spectral fitting