[Tue Jan 3 11:42:30 2012] Detection parameters: Position = (437.8, 347.8) = 14 44 58.05 -62 15 46.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 397.7 +/- 37.2 Background counts = 79.2 Rate = 0.02 +/- 0.002 [Tue Jan 3 11:42:33 2012] Off-axis axis estimate = 10.72' [Tue Jan 3 19:57:14 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting [Tue Jan 3 19:57:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jan 3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 11.79" [Tue Jan 3 19:57:14 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.874 [Tue Jan 3 19:57:14 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.79" [Wed Jan 4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5.ximg exists [Wed Jan 4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5.csv [Wed Jan 4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5_1.ximg exists [Wed Jan 4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5.csv [Wed Jan 4 01:37:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed Jan 4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed Jan 4 01:37:42 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Wed Jan 4 08:17:22 2012] Warning, spatial fit 5 centroid is now closest to src. 11 [Wed Jan 4 08:17:22 2012] Source 7 is offset by -1.898349 and 3.504855 pixels which is larger than 2 X fitted extent = 1.332694 x 1.332694, not incorporating fit results [Wed Jan 4 08:17:22 2012] Vigneting correction estimate = 1.000000 [Wed Jan 4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 4 08:17:22 2012] Assessing source extent using major [Wed Jan 4 08:17:22 2012] Source does appear to be extended [Wed Jan 4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 4 08:17:22 2012] Source is confused with source 2 [Thu Jan 5 03:23:24 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting [Thu Jan 5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 11.79" [Thu Jan 5 03:23:24 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.874 [Thu Jan 5 03:23:24 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.79" [Thu Jan 5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5.ximg exists [Thu Jan 5 10:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5.csv [Thu Jan 5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5_1.ximg exists [Thu Jan 5 10:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5.csv [Thu Jan 5 10:04:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jan 5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Thu Jan 5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Thu Jan 5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Fri Jan 6 00:00:47 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.984752 pixels away [Fri Jan 6 00:00:47 2012] Spatial fit model total counts = 7476.400000, observed total counts = 7467.000000 [Fri Jan 6 00:00:47 2012] Offset between fit and detection position for source 7 = 2.982935 pixels [Fri Jan 6 00:00:47 2012] Warning, changing simple spatial fit ID from 5 to 24 [Fri Jan 6 00:00:47 2012] 7640.050000 total counts/ 3555.470000 bgd. counts: snr = 68.501313 Spatial fit parameters: Offset between fit and detection position for source 7 = 2.982935 pixels Position = (440.7, 347.6) = 14 44 56.20 -62 15 47.1 Extent = 48.9 (48.8-48.9)", rotation angle = 0 Source counts = 4084.6 +/- 87.4 Background counts = 3555.5 Rate = 0.1 +/- 0.003 [Fri Jan 6 00:00:47 2012] Vigneting correction estimate = 1.000000 [Fri Jan 6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 6 00:00:47 2012] Assessing source extent using major axis lower bound [Fri Jan 6 00:00:47 2012] Source does appear to be extended [Fri Jan 6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jan 6 06:15:09 2012] Counts = 4084.580000, rescaling region sizes by 2.000000 [Fri Jan 6 06:15:09 2012] XMMSAS src. selection expression = ellipse(38295.270000, 30189.516000, 5862.972169, 5862.972169, 0.000000, X, Y) [Fri Jan 6 06:15:09 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7_src.reg [Fri Jan 6 06:15:09 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (104, 11) - (595, 595) [Fri Jan 6 06:15:09 2012] XMMSAS bgd. selection expression = annulus(38295.270000, 30189.516000, 19543.240562, 39086.481125, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(35060.134200, 21691.238000, 1689.072049, 1689.072049, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(35162.360000, 22204.614000, 800.752023, 800.752023, 0.000000, X, Y) && !ellipse(38860.252000, 31890.520000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36185.685760, 19884.565216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(26455.055600, 33523.272600, 385.998411, 385.998411, 0.000000, X, Y) && !ellipse(35677.056488, 24396.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35429.755600, 23869.044600, 1534.032044, 1534.032044, 0.000000, X, Y) && !ellipse(35209.489899, 24664.523315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36158.081421, 18936.078568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35816.578278, 20217.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41065.816000, 32604.606000, 2107.080061, 2107.080061, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(35011.756592, 25887.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32430.059800, 26012.248400, 346.411210, 346.411210, 0.000000, X, Y) && !ellipse(36404.032715, 17691.094177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.312317, 19013.059814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41819.444000, 32994.472000, 1476.992042, 1476.992042, 0.000000, X, Y) && !ellipse(36659.758000, 17274.808000, 1917.144055, 1917.144055, 0.000000, X, Y) && !ellipse(36408.028534, 23694.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34969.002655, 19546.052963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38821.126251, 29249.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37393.185120, 17342.252533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.636000, 25210.644000, 1553.728045, 1553.728045, 0.000000, X, Y) && !ellipse(39957.128326, 24741.776703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36155.213989, 15919.644028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41986.999115, 32360.893036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42164.890000, 31413.766000, 1112.384032, 1112.384032, 0.000000, X, Y) [Fri Jan 6 06:15:09 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7.gif [Fri Jan 6 06:29:49 2012] Mean detx,y = (204.32, 11315.18) [Fri Jan 6 06:29:53 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jan 6 06:39:14 2012] Binned source spectrum to 10 counts/bin [Fri Jan 6 06:39:15 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Fri Jan 6 06:39:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7_bgd.pi.gz [Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products [Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.128, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src7.arf [Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 11 17:23:20 2012] Updating source flux to 1.8e-12 [Wed Jan 11 17:23:25 2012] Flag b found in src. 7 procflags, skipping spectral fitting [Wed Jan 11 17:23:25 2012] Flag c found in src. 7 procflags, skipping spectral fitting