[Tue Jan  3 11:42:32 2012] Detection parameters:
  Position = (403.0, 298.1) = 14 45 19.59 -62 19 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 16.8
  Background counts = 57.0
  Rate = 0.005 +/- 0.0007

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 7.58'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.047
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 10.22"
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40.csv
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40.csv
[Wed Jan  4 01:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Jan  4 01:37:44 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Jan  4 01:37:44 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Wed Jan  4 08:17:22 2012] Warning, spatial fit 40 centroid is now closest to src. 26
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 61
[Thu Jan  5 03:23:24 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Thu Jan  5 03:23:24 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.047
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.22"
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src34.ximg exists
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Jan  5 10:04:50 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src34 appears to have run properly
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 12.066814 pixels away
[Fri Jan  6 00:00:47 2012] Source 59 is offset by -4.910476 and -6.537952 pixels which is larger than
2 X fitted extent = 2.500533 x 5.819954, not incorporating fit results
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:11 2012] XMMSAS src. selection expression = ellipse(35011.756592, 25887.796204, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59_src.reg
[Fri Jan  6 06:15:11 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (365, 261) - (440, 336)
[Fri Jan  6 06:15:11 2012] XMMSAS bgd. selection expression = annulus(35011.756592, 25887.796204, 1087.500000, 2175.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(35677.056488, 24396.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35429.755600, 23869.044600, 1534.032044, 1534.032044, 0.000000, X, Y) && !ellipse(35209.489899, 24664.523315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(36408.028534, 23694.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.636000, 25210.644000, 1553.728045, 1553.728045, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59.gif
[Fri Jan  6 07:22:49 2012] Mean detx,y = (-2741.51, 7730.38) 
[Fri Jan  6 07:22:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:23:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:23:06 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Jan  6 07:23:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri Jan  6 09:14:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 09:14:47 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.00517, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src59.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 6.7e-14
[Wed Jan 11 17:23:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting