[Tue Jan  3 11:42:32 2012] Detection parameters:
  Position = (446.8, 336.8) = 14 44 52.40 -62 16 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.5 +/- 19.9
  Background counts = 82.7
  Rate = 0.003 +/- 0.0006

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 11.11'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.802
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 11.98"
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52.csv
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52.csv
[Wed Jan  4 01:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:44 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed Jan  4 01:37:44 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Jan  4 01:37:44 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Wed Jan  4 08:17:22 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 10.557964 pixels away
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 15
[Thu Jan  5 03:23:24 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Thu Jan  5 03:23:24 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.802
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 11.98"
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43.csv
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43.csv
[Thu Jan  5 10:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:04:52 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Jan  5 10:04:52 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Jan  5 10:04:52 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 11.317333 pixels away
[Fri Jan  6 00:00:47 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 10.820074 pixels away
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:11 2012] XMMSAS src. selection expression = ellipse(38821.126251, 29249.857147, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52_src.reg
[Fri Jan  6 06:15:11 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (409, 299) - (484, 374)
[Fri Jan  6 06:15:12 2012] XMMSAS bgd. selection expression = annulus(38821.126251, 29249.857147, 1087.500000, 2175.000000, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(38860.252000, 31890.520000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41065.816000, 32604.606000, 2107.080061, 2107.080061, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 06:15:12 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52.gif
[Fri Jan  6 07:26:46 2012] Mean detx,y = (59.06, 11803.25) 
[Fri Jan  6 07:26:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:27:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:27:11 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Fri Jan  6 07:27:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Fri Jan  6 09:23:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 09:23:29 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.00331, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src52.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 7.7e-14
[Wed Jan 11 17:23:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting