[Tue Jan  3 11:42:32 2012] Detection parameters:
  Position = (402.5, 225.2) = 14 45 19.70 -62 24 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 17.5
  Background counts = 106.6
  Rate = 0.003 +/- 0.0005

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 9.22'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.5, npix_max = 36, mask sum = 22, frac = 0.596
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 11.04"
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51.csv
[Wed Jan  4 01:37:41 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Jan  4 01:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51.csv
[Wed Jan  4 01:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:44 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Jan  4 01:37:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jan  4 01:37:44 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jan  4 01:37:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jan  4 01:37:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 08:17:22 2012] Source 45 is offset by 0.788145 and 1.512862 pixels which is larger than
2 X fitted extent = 1.286014 x 1.286014, not incorporating fit results
[Wed Jan  4 08:17:22 2012] Warning, spatial fit 51 centroid is now closest to src. 30
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 31
[Thu Jan  5 03:23:24 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Thu Jan  5 03:23:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 22, frac = 0.596
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 11.04"
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42.csv
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42_1.ximg exists
[Thu Jan  5 10:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42.csv
[Thu Jan  5 10:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:04:52 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Thu Jan  5 10:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42.csv
[Thu Jan  5 10:04:52 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Thu Jan  5 10:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42.csv
[Thu Jan  5 10:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 00:00:47 2012] Source 45 is offset by 0.758329 and -9.489872 pixels which is larger than
2 X fitted extent = 7.004046 x 7.004046, not incorporating fit results
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 42 centroid is now closest to src. 32
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:11 2012] XMMSAS src. selection expression = ellipse(34969.002655, 19546.052963, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45_src.reg
[Fri Jan  6 06:15:11 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (365, 188) - (440, 263)
[Fri Jan  6 06:15:11 2012] XMMSAS bgd. selection expression = annulus(34969.002655, 19546.052963, 1087.500000, 2175.000000, X, Y) && !ellipse(35060.134200, 21691.238000, 1689.072049, 1689.072049, 0.000000, X, Y) && !ellipse(35162.360000, 22204.614000, 800.752023, 800.752023, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36185.685760, 19884.565216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36158.081421, 18936.078568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35816.578278, 20217.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(36404.032715, 17691.094177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.312317, 19013.059814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36659.758000, 17274.808000, 1917.144055, 1917.144055, 0.000000, X, Y) && !ellipse(37393.185120, 17342.252533, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45.gif
[Fri Jan  6 07:26:25 2012] Mean detx,y = (-8997.91, 6874.21) 
[Fri Jan  6 07:26:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:26:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:26:41 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Jan  6 07:26:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Fri Jan  6 09:23:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 09:23:21 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.00336, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src45.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 7.2e-14
[Wed Jan 11 17:23:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting