[Tue Jan  3 11:42:32 2012] Detection parameters:
  Position = (409.7, 275.0) = 14 45 15.33 -62 20 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.2 +/- 22.5
  Background counts = 55.6
  Rate = 0.009 +/- 0.001

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 8.24'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.993
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.55"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jan  4 01:37:40 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src30 appears to have run properly
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jan  4 01:37:43 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1571.140000, observed total counts = 1572.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 43 = 3.312849 pixels
[Wed Jan  4 08:17:22 2012] Warning, changing simple spatial fit ID from 30 to 29
[Wed Jan  4 08:17:22 2012] 1456.781000 total counts/ 926.344000 bgd. counts: snr = 17.428005
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.312849 pixels
  Position = (408.1, 277.9) = 14 45 16.33 -62 20 50.7
  Extent = 21.1 (21.0-42.2)", rotation angle = 0
  Source counts = 530.4 +/- 38.2
  Background counts = 926.3
  Rate = 0.02 +/- 0.001
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1559.340000, observed total counts = 1559.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 43 = 3.045318 pixels
[Wed Jan  4 08:17:22 2012] Warning, changing simple spatial fit ID from 29 to 30
[Wed Jan  4 08:17:22 2012] 1469.285000 total counts/ 1126.320000 bgd. counts: snr = 10.219247
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.045318 pixels
  Position = (407.8, 274.9) = 14 45 16.53 -62 21 3.9
  Extent = 19.2 (15.3-21.1)", rotation angle = 0
  Source counts = 343.0 +/- 38.3
  Background counts = 1126.3
  Rate = 0.01 +/- 0.001
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 27
[Thu Jan  5 03:23:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 19.18"
[Thu Jan  5 03:23:24 2012] source mask rpix=4.4, npix_max = 96, mask sum = 98, frac = 1.017
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 19.18"
[Thu Jan  5 10:04:49 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jan  5 10:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27.csv
[Thu Jan  5 10:04:49 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jan  5 10:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27.csv
[Thu Jan  5 10:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 27 centroid is now closest to src. 63
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:10 2012] XMMSAS src. selection expression = ellipse(35429.755600, 23869.044600, 1150.524033, 1150.524033, 0.000000, X, Y)
[Fri Jan  6 06:15:10 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43_src.reg
[Fri Jan  6 06:15:10 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (342, 209) - (474, 341)
[Fri Jan  6 06:15:10 2012] XMMSAS bgd. selection expression = annulus(35429.755600, 23869.044600, 1917.540055, 3835.080110, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(35060.134200, 21691.238000, 1689.072049, 1689.072049, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(35162.360000, 22204.614000, 800.752023, 800.752023, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36185.685760, 19884.565216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(35677.056488, 24396.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.489899, 24664.523315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35816.578278, 20217.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(35011.756592, 25887.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32430.059800, 26012.248400, 346.411210, 346.411210, 0.000000, X, Y) && !ellipse(36408.028534, 23694.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34969.002655, 19546.052963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.636000, 25210.644000, 1553.728045, 1553.728045, 0.000000, X, Y) && !ellipse(39957.128326, 24741.776703, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 06:15:10 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43.gif
[Fri Jan  6 07:18:16 2012] Mean detx,y = (-4837.73, 7762.52) 
[Fri Jan  6 07:18:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:18:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:18:45 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jan  6 07:18:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src43.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 1.3e-13
[Wed Jan 11 17:23:25 2012] Flag c found in src. 43 procflags, skipping spectral fitting