[Tue Jan  3 11:42:31 2012] Detection parameters:
  Position = (447.0, 366.9) = 14 44 52.39 -62 14 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.8 +/- 28.8
  Background counts = 78.8
  Rate = 0.02 +/- 0.001

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 11.86'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.806
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.36"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7.csv
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7.csv
[Wed Jan  4 01:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jan  4 01:37:42 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jan  4 08:17:22 2012] Warning, spatial fit 7 centroid is now closest to src. 13
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1623.500000, observed total counts = 1623.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 33 = 0.521091 pixels
[Wed Jan  4 08:17:22 2012] Warning, changing simple spatial fit ID from 7 to 34
[Wed Jan  4 08:17:22 2012] 1479.200000 total counts/ 1031.660000 bgd. counts: snr = 13.933607
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.521091 pixels
  Position = (447.3, 367.2) = 14 44 52.16 -62 14 21.4
  Extent = 25.4 (25.4-50.8)" x 11.5 (9.3-14.4)", rotation angle = 307 (293-317) degrees
  Source counts = 447.5 +/- 38.5
  Background counts = 1031.7
  Rate = 0.01 +/- 0.001
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.76
[Wed Jan  4 08:17:22 2012] Source is asymmetric
[Wed Jan  4 08:17:22 2012] Source is confused with source 11
[Wed Jan  4 08:17:22 2012] Source is confused with source 34
[Wed Jan  4 08:17:22 2012] Source is confused with source 47
[Wed Jan  4 08:17:22 2012] Source is confused with source 37
[Thu Jan  5 03:23:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 18.47"
[Thu Jan  5 03:23:24 2012] source mask rpix=4.2, npix_max = 90, mask sum = 90, frac = 0.999
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 18.47"
[Thu Jan  5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jan  5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jan  5 10:04:47 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 7 centroid is now closest to src. 38
[Fri Jan  6 00:00:47 2012] Spatial fit model total counts = 1622.870000, observed total counts = 1623.000000
[Fri Jan  6 00:00:47 2012] Offset between fit and detection position for source 33 = 0.172861 pixels
[Fri Jan  6 00:00:47 2012] Warning, changing simple spatial fit ID from 7 to 30
[Fri Jan  6 00:00:47 2012] 1375.102000 total counts/ 1092.150000 bgd. counts: snr = 8.561929
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.172861 pixels
  Position = (447.2, 367.1) = 14 44 52.23 -62 14 21.9
  Extent = 13.0 (9.3-22.3)", rotation angle = 0
  Source counts = 283.0 +/- 37.1
  Background counts = 1092.2
  Rate = 0.009 +/- 0.001
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:09 2012] XMMSAS src. selection expression = ellipse(38860.252000, 31890.520000, 777.312022, 777.312022, 0.000000, X, Y)
[Fri Jan  6 06:15:09 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33_src.reg
[Fri Jan  6 06:15:09 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (403, 322) - (492, 412)
[Fri Jan  6 06:15:09 2012] XMMSAS bgd. selection expression = annulus(38860.252000, 31890.520000, 1295.520037, 2591.040075, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41065.816000, 32604.606000, 2107.080061, 2107.080061, 0.000000, X, Y) && !ellipse(41819.444000, 32994.472000, 1476.992042, 1476.992042, 0.000000, X, Y) && !ellipse(38821.126251, 29249.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41986.999115, 32360.893036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42164.890000, 31413.766000, 1112.384032, 1112.384032, 0.000000, X, Y)
[Fri Jan  6 06:15:09 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33.gif
[Fri Jan  6 06:39:46 2012] Mean detx,y = (2548.45, 12303.64) 
[Fri Jan  6 06:39:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 06:40:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 06:40:05 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jan  6 06:40:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.00886, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src33.arf
[Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:20 2012] Updating source flux to 1.5e-13
[Wed Jan 11 17:23:25 2012] Flag c found in src. 33 procflags, skipping spectral fitting