[Tue Jan  3 11:42:31 2012] Detection parameters:
  Position = (412.2, 232.9) = 14 45 13.63 -62 24 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.3 +/- 24.7
  Background counts = 88.9
  Rate = 0.006 +/- 0.0007

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 9.52'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 11.19"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35.csv
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35.csv
[Wed Jan  4 01:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jan  4 01:37:43 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jan  4 01:37:43 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Jan  4 08:17:22 2012] Source 30 is offset by -3.205737 and -7.431290 pixels which is larger than
2 X fitted extent = 1.725398 x 1.725398, not incorporating fit results
[Wed Jan  4 08:17:22 2012] Warning, spatial fit 35 centroid is now closest to src. 45
[Wed Jan  4 08:17:22 2012] Source 30 is offset by 0.089727 and -3.206049 pixels which is larger than
2 X fitted extent = 1.269071 x 1.269071, not incorporating fit results
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 4
[Thu Jan  5 03:23:24 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Thu Jan  5 03:23:24 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 11.19"
[Thu Jan  5 10:04:49 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jan  5 10:04:49 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jan  5 10:04:50 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src31 appears to have run properly
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.015467 pixels away
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 31 centroid is now closest to src. 45
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:11 2012] XMMSAS src. selection expression = ellipse(35816.578278, 20217.845734, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30_src.reg
[Fri Jan  6 06:15:11 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (375, 195) - (450, 270)
[Fri Jan  6 06:15:11 2012] XMMSAS bgd. selection expression = annulus(35816.578278, 20217.845734, 1087.500000, 2175.000000, X, Y) && !ellipse(35060.134200, 21691.238000, 1689.072049, 1689.072049, 0.000000, X, Y) && !ellipse(35162.360000, 22204.614000, 800.752023, 800.752023, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36185.685760, 19884.565216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35429.755600, 23869.044600, 1534.032044, 1534.032044, 0.000000, X, Y) && !ellipse(36158.081421, 18936.078568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(36404.032715, 17691.094177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.312317, 19013.059814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36659.758000, 17274.808000, 1917.144055, 1917.144055, 0.000000, X, Y) && !ellipse(34969.002655, 19546.052963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37393.185120, 17342.252533, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 06:15:11 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30.gif
[Fri Jan  6 07:20:09 2012] Mean detx,y = (-8506.74, 7632.39) 
[Fri Jan  6 07:20:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 07:20:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 07:20:26 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jan  6 07:20:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jan  6 09:06:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 09:06:40 2012] rmf not generated due to insufficient counts
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jan 11 17:23:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:21 2012] Using photon index=1.80, rate=0.00632, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src30.arf
[Wed Jan 11 17:23:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:21 2012] Updating source flux to 1.1e-13
[Wed Jan 11 17:23:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting