[Tue Jan  3 11:42:30 2012] Detection parameters:
  Position = (402.0, 246.0) = 14 45 20.08 -62 23 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 499.8 +/- 31.1
  Background counts = 87.5
  Rate = 0.02 +/- 0.002

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 8.41'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.980
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.64"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3.csv
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3.csv
[Wed Jan  4 01:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan  4 01:37:42 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan  4 08:17:22 2012] Warning, spatial fit 3 centroid is now closest to src. 66
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1977.050000, observed total counts = 1989.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 3 = 4.156264 pixels
[Wed Jan  4 08:17:22 2012] Warning, changing simple spatial fit ID from 3 to 6
[Wed Jan  4 08:17:22 2012] 2095.409000 total counts/ 416.789000 bgd. counts: snr = 82.223180
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.156264 pixels
  Position = (403.5, 249.9) = 14 45 19.12 -62 22 52.8
  Extent = 21.1 (21.1-21.1)", rotation angle = 0
  Source counts = 1678.6 +/- 45.8
  Background counts = 416.8
  Rate = 0.05 +/- 0.001
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 6
[Wed Jan  4 08:17:22 2012] Source is confused with source 29
[Wed Jan  4 08:17:22 2012] Source is confused with source 66
[Thu Jan  5 03:23:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 21.11"
[Thu Jan  5 03:23:24 2012] source mask rpix=4.9, npix_max = 114, mask sum = 102, frac = 0.890
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.11"
[Thu Jan  5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan  5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan  5 10:04:47 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan  5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan  5 10:04:50 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:15:09 2012] Counts = 1678.620000, rescaling region sizes by 2.000000
[Fri Jan  6 06:15:09 2012] XMMSAS src. selection expression = ellipse(35060.134200, 21691.238000, 2533.608073, 2533.608073, 0.000000, X, Y)
[Fri Jan  6 06:15:09 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3_src.reg
[Fri Jan  6 06:15:09 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (258, 104) - (549, 395)
[Fri Jan  6 06:15:09 2012] XMMSAS bgd. selection expression = annulus(35060.134200, 21691.238000, 8445.360243, 16890.720486, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(37394.852000, 28932.162000, 2050.912059, 2050.912059, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(35162.360000, 22204.614000, 800.752023, 800.752023, 0.000000, X, Y) && !ellipse(38860.252000, 31890.520000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36185.685760, 19884.565216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(26455.055600, 33523.272600, 385.998411, 385.998411, 0.000000, X, Y) && !ellipse(35677.056488, 24396.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35429.755600, 23869.044600, 1534.032044, 1534.032044, 0.000000, X, Y) && !ellipse(35209.489899, 24664.523315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36158.081421, 18936.078568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35816.578278, 20217.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41065.816000, 32604.606000, 2107.080061, 2107.080061, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(35011.756592, 25887.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32430.059800, 26012.248400, 346.411210, 346.411210, 0.000000, X, Y) && !ellipse(36404.032715, 17691.094177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.312317, 19013.059814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41819.444000, 32994.472000, 1476.992042, 1476.992042, 0.000000, X, Y) && !ellipse(36659.758000, 17274.808000, 1917.144055, 1917.144055, 0.000000, X, Y) && !ellipse(36408.028534, 23694.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34969.002655, 19546.052963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38821.126251, 29249.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37393.185120, 17342.252533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.636000, 25210.644000, 1553.728045, 1553.728045, 0.000000, X, Y) && !ellipse(39957.128326, 24741.776703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36155.213989, 15919.644028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41986.999115, 32360.893036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42164.890000, 31413.766000, 1112.384032, 1112.384032, 0.000000, X, Y)
[Fri Jan  6 06:15:09 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3.gif
[Fri Jan  6 06:22:07 2012] Mean detx,y = (-6988.01, 7531.84) 
[Fri Jan  6 06:22:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 06:28:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 06:28:39 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 06:28:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products
[Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.0526, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src3.arf
[Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 11 17:23:20 2012] Updating source flux to 7e-13
[Wed Jan 11 17:23:25 2012] Flag c found in src. 3 procflags, skipping spectral fitting