[Tue Jan  3 11:42:31 2012] Detection parameters:
  Position = (407.5, 270.9) = 14 45 16.71 -62 21 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.3 +/- 24.9
  Background counts = 65.0
  Rate = 0.01 +/- 0.001

[Tue Jan  3 11:42:33 2012] Off-axis axis estimate = 8.15'
[Tue Jan  3 19:57:14 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Tue Jan  3 19:57:14 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.853
[Tue Jan  3 19:57:14 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.50"
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12.csv
[Wed Jan  4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jan  4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12.csv
[Wed Jan  4 01:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jan  4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jan  4 01:37:42 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Jan  4 08:17:22 2012] Spatial fit model total counts = 1650.810000, observed total counts = 1652.000000
[Wed Jan  4 08:17:22 2012] Offset between fit and detection position for source 27 = 1.951260 pixels
[Wed Jan  4 08:17:22 2012] 1547.668900 total counts/ 1481.400000 bgd. counts: snr = 1.721764
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.951260 pixels
  Position = (405.7, 270.0) = 14 45 17.80 -62 21 25.1
  Extent = 7.3 (2.6-12.5)", rotation angle = 0
  Source counts = 66.3 +/- 39.3
  Background counts = 1481.4
  Rate = 0.002 +/- 0.001
[Wed Jan  4 08:17:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:17:22 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:17:22 2012] Source does appear to be extended
[Wed Jan  4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:17:22 2012] Source is confused with source 28
[Wed Jan  4 08:17:22 2012] Source is confused with source 43
[Thu Jan  5 03:23:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jan  5 03:23:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Thu Jan  5 03:23:24 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.35"
[Thu Jan  5 10:04:48 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jan  5 10:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 10:04:48 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jan  5 10:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 10:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jan  5 10:04:51 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jan  5 10:04:51 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jan  6 00:00:47 2012] Warning, spatial fit 11 centroid is now closest to src. 28
[Fri Jan  6 00:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 00:00:47 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 00:00:47 2012] Source does appear to be extended
[Fri Jan  6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 00:00:48 2012] Deleting source due to low Poisson probability 0.9