[Tue Jan 3 11:42:29 2012] Detection parameters: Position = (437.0, 334.7) = 14 44 58.48 -62 16 42.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 425.3 +/- 31.6 Background counts = 91.6 Rate = 0.02 +/- 0.002 [Tue Jan 3 11:42:33 2012] Off-axis axis estimate = 10.39' [Tue Jan 3 19:57:14 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting [Tue Jan 3 19:57:14 2012] Initial guess for spatial extent in simple fitting = 11.62" [Tue Jan 3 19:57:14 2012] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.845 [Tue Jan 3 19:57:14 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.62" [Wed Jan 4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4.ximg exists [Wed Jan 4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4.csv [Wed Jan 4 01:37:40 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4_1.ximg exists [Wed Jan 4 01:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4.csv [Wed Jan 4 01:37:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Wed Jan 4 01:37:42 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Wed Jan 4 01:37:42 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Wed Jan 4 08:17:22 2012] Warning, spatial fit 4 centroid is now closest to src. 51 [Wed Jan 4 08:17:22 2012] Source 1 is offset by -1.286592 and 4.447020 pixels which is larger than 2 X fitted extent = 1.287412 x 1.287412, not incorporating fit results [Wed Jan 4 08:17:22 2012] Vigneting correction estimate = 1.000000 [Wed Jan 4 08:17:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 4 08:17:22 2012] Assessing source extent using major [Wed Jan 4 08:17:22 2012] Source does appear to be extended [Wed Jan 4 08:17:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 4 08:17:22 2012] Source is confused with source 5 [Thu Jan 5 03:23:24 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting [Thu Jan 5 03:23:24 2012] Initial guess for spatial extent in simple fitting = 11.62" [Thu Jan 5 03:23:24 2012] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.845 [Thu Jan 5 03:23:24 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.62" [Thu Jan 5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4.ximg exists [Thu Jan 5 10:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4.csv [Thu Jan 5 10:04:47 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4_1.ximg exists [Thu Jan 5 10:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4.csv [Thu Jan 5 10:04:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jan 5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Thu Jan 5 10:04:50 2012] fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Thu Jan 5 10:04:50 2012] Fit fullrun_mos1_xmm0504810601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Fri Jan 6 00:00:47 2012] Warning, spatial fit 4 centroid is now closest to src. 5 [Fri Jan 6 00:00:47 2012] Spatial fit model total counts = 5154.010000, observed total counts = 5157.000000 [Fri Jan 6 00:00:47 2012] Offset between fit and detection position for source 1 = 6.828043 pixels [Fri Jan 6 00:00:47 2012] Warning, changing simple spatial fit ID from 4 to 23 [Fri Jan 6 00:00:47 2012] 4979.568000 total counts/ 4071.630000 bgd. counts: snr = 14.228923 Spatial fit parameters: Offset between fit and detection position for source 1 = 6.828043 pixels Position = (430.4, 333.1) = 14 45 2.61 -62 16 50.2 Extent = 25.6 (25.6-25.7)", rotation angle = 0 Source counts = 907.9 +/- 70.6 Background counts = 4071.6 Rate = 0.03 +/- 0.002 [Fri Jan 6 00:00:47 2012] Vigneting correction estimate = 1.000000 [Fri Jan 6 00:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 6 00:00:47 2012] Assessing source extent using major axis lower bound [Fri Jan 6 00:00:47 2012] Source does appear to be extended [Fri Jan 6 00:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jan 6 06:15:09 2012] XMMSAS src. selection expression = ellipse(37394.852000, 28932.162000, 1538.184044, 1538.184044, 0.000000, X, Y) [Fri Jan 6 06:15:09 2012] Writing source region out to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1_src.reg [Fri Jan 6 06:15:09 2012] Extracting stamp from image fullrun_mos1_xmm0504810601_pi300-10000_cl_sm2.00.img.gz, (342, 245) - (519, 422) [Fri Jan 6 06:15:09 2012] XMMSAS bgd. selection expression = annulus(37394.852000, 28932.162000, 2563.640074, 5127.280148, X, Y) && !ellipse(37901.412400, 29607.510000, 558.492016, 558.492016, 0.000000, X, Y) && !ellipse(37480.484000, 28973.186000, 1862.720054, 1862.720054, 0.000000, X, Y) && !ellipse(38295.270000, 30189.516000, 3908.648112, 3908.648112, 0.000000, X, Y) && !ellipse(38860.252000, 31890.520000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(35510.772200, 27076.056000, 1621.904047, 1621.904047, 0.000000, X, Y) && !ellipse(37632.158000, 28305.618000, 2395.200069, 2395.200069, 0.000000, X, Y) && !ellipse(36132.306000, 26188.930000, 1034.968030, 1034.968030, 0.000000, X, Y) && !ellipse(35931.174000, 27101.210000, 3505.328101, 3505.328101, 0.000000, X, Y) && !ellipse(38471.766000, 29910.190000, 1954.720056, 1954.720056, 0.000000, X, Y) && !ellipse(35429.702280, 22969.526000, 1690.904049, 211.363206, 79.009800, X, Y) && !ellipse(36268.631531, 27620.048828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39217.737183, 30925.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36424.062256, 26573.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38510.558000, 30412.970000, 4140.240119, 4140.240119, 0.000000, X, Y) && !ellipse(36563.606000, 28230.164000, 1728.072050, 1728.072050, 0.000000, X, Y) && !ellipse(39594.438000, 30861.936000, 3008.664087, 3008.664087, 0.000000, X, Y) && !ellipse(35677.056488, 24396.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35429.755600, 23869.044600, 1534.032044, 1534.032044, 0.000000, X, Y) && !ellipse(35209.489899, 24664.523315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39583.284271, 32230.093018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41065.816000, 32604.606000, 2107.080061, 2107.080061, 0.000000, X, Y) && !ellipse(35092.890000, 22445.458000, 1651.576048, 1651.576048, 0.000000, X, Y) && !ellipse(35011.756592, 25887.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32430.059800, 26012.248400, 346.411210, 346.411210, 0.000000, X, Y) && !ellipse(41819.444000, 32994.472000, 1476.992042, 1476.992042, 0.000000, X, Y) && !ellipse(36408.028534, 23694.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38821.126251, 29249.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.162811, 30828.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.636000, 25210.644000, 1553.728045, 1553.728045, 0.000000, X, Y) && !ellipse(39957.128326, 24741.776703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41986.999115, 32360.893036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42164.890000, 31413.766000, 1112.384032, 1112.384032, 0.000000, X, Y) [Fri Jan 6 06:15:09 2012] Writing fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1.gif [Fri Jan 6 06:28:47 2012] Mean detx,y = (-175.79, 10533.41) [Fri Jan 6 06:28:50 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jan 6 06:29:35 2012] Binned source spectrum to 10 counts/bin [Fri Jan 6 06:29:36 2012] Setting source spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Fri Jan 6 06:29:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Jan 11 17:23:20 2012] Updating aperture counts using extracted products [Wed Jan 11 17:23:20 2012] Error reading totcts from fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Jan 11 17:23:20 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 11 17:23:20 2012] Using photon index=1.80, rate=0.0284, arf fullrun_mos1_xmm0504810601_pi300-10000_pass1_cl_src1.arf [Wed Jan 11 17:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 11 17:23:20 2012] Updating source flux to 4.3e-13 [Wed Jan 11 17:23:25 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Wed Jan 11 17:23:25 2012] Flag c found in src. 1 procflags, skipping spectral fitting