[Mon May  7 11:52:48 2012] Detection parameters:
  Position = (120.7, 209.9) = 14 42 33.96 -62 43 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1617.4 +/- 76.3
  Background counts = 1098.6
  Rate = 0.02 +/- 0.001

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 14.40'
[Mon May  7 12:38:04 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Mon May  7 12:38:04 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.061
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 13.63"
[Thu May 10 23:27:28 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src77.ximg exists
[Thu May 10 23:27:28 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src77_1.ximg exists
[Thu May 10 23:27:28 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src77 appears to have run properly
[Thu May 10 23:27:30 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Thu May 10 23:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77.csv
[Thu May 10 23:27:31 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Thu May 10 23:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77.csv
[Thu May 10 23:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:03:28 2012] Spatial fit model total counts = 16586.700000, observed total counts = 18105.000000
[Sat May 12 23:03:28 2012] Offset between fit and detection position for source 81 = 7.499582 pixels
[Sat May 12 23:03:28 2012] 16612.530000 total counts/ 13793.800000 bgd. counts: snr = 24.000015
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 7.499582 pixels
  Position = (119.0, 217.2) = 14 42 35.01 -62 43 19.2
  Extent = 18.6" x 18.6", rotation angle = 0
  Source counts = 2818.7 +/- 128.9
  Background counts = 13793.8
  Rate = 0.04 +/- 0.002
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 18.56"
[Sat May 12 23:06:09 2012] source mask rpix=4.3, npix_max = 90, mask sum = 98, frac = 1.078
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 18.56"
[Tue May 15 06:48:24 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77.ximg exists
[Tue May 15 06:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77.csv
[Tue May 15 06:48:24 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue May 15 06:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77.csv
[Tue May 15 06:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue May 15 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77.csv
[Tue May 15 06:48:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue May 15 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77.csv
[Tue May 15 06:48:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes