[Mon May  7 11:52:43 2012] Detection parameters:
  Position = (295.3, 398.9) = 14 40 43.44 -62 30 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2642.4 +/- 82.7
  Background counts = 2063.5
  Rate = 0.04 +/- 0.001

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 7.29'
[Mon May  7 12:38:04 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Mon May  7 12:38:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.07"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55.ximg exists
[Thu May 10 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55.csv
[Thu May 10 23:27:28 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu May 10 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55.csv
[Thu May 10 23:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:30 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu May 10 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu May 10 23:27:30 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu May 10 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu May 10 23:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:03:28 2012] Spatial fit model total counts = 41830.400000, observed total counts = 32737.000000
[Sat May 12 23:03:28 2012] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 23:03:29 2012] Spatial fit model total counts = 24681.900000, observed total counts = 29750.000000
[Sat May 12 23:03:29 2012] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:06:09 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sat May 12 23:06:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.07"
[Tue May 15 06:48:24 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src55.ximg exists
[Tue May 15 06:48:24 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue May 15 06:48:24 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src55 appears to have run properly
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Tue May 15 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes