[Mon May  7 11:52:39 2012] Detection parameters:
  Position = (311.0, 367.0) = 14 40 33.59 -62 32 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11507.8 +/- 145.3
  Background counts = 1122.1
  Rate = 0.2 +/- 0.003

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 5.05'
[Mon May  7 12:38:04 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Mon May  7 12:38:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.375
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.96"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34.csv
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34.csv
[Thu May 10 23:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May 10 23:27:29 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sat May 12 23:03:27 2012] Spatial fit model total counts = 66544.100000, observed total counts = 65134.000000
[Sat May 12 23:03:27 2012] Offset between fit and detection position for source 36 = 4.581843 pixels
[Sat May 12 23:03:27 2012] 62511.800000 total counts/ 25600.000000 bgd. counts: snr = 230.698750
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.581843 pixels
  Position = (310.5, 371.6) = 14 40 33.87 -62 32 10.7
  Extent = 17.9 (17.9-35.8)", rotation angle = 0
  Source counts = 36911.8 +/- 250.0
  Background counts = 25600.0
  Rate = 0.5 +/- 0.004
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:03:29 2012] Source is confused with source 30
[Sat May 12 23:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 17.91"
[Sat May 12 23:06:09 2012] source mask rpix=4.1, npix_max = 85, mask sum = 78, frac = 0.915
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 17.91"
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34.csv
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34.csv
[Tue May 15 06:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 15 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes