[Mon May  7 11:52:37 2012] Detection parameters:
  Position = (329.9, 249.0) = 14 40 21.59 -62 41 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14209.2 +/- 155.2
  Background counts = 581.0
  Rate = 0.3 +/- 0.003

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 4.25'
[Mon May  7 12:38:04 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Mon May  7 12:38:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.55"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27.csv
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27.csv
[Thu May 10 23:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 10 23:27:29 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat May 12 23:03:27 2012] Spatial fit model total counts = 70823.100000, observed total counts = 71844.000000
[Sat May 12 23:03:27 2012] Offset between fit and detection position for source 27 = 2.437746 pixels
[Sat May 12 23:03:27 2012] 59780.800000 total counts/ 25600.000000 bgd. counts: snr = 213.630000
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.437746 pixels
  Position = (331.4, 251.0) = 14 40 20.66 -62 40 55.2
  Extent = 17.1 (17.1-17.1)", rotation angle = 0
  Source counts = 34180.8 +/- 244.5
  Background counts = 25600.0
  Rate = 0.5 +/- 0.003
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:03:29 2012] Source is confused with source 20
[Sat May 12 23:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 17.10"
[Sat May 12 23:06:09 2012] source mask rpix=3.9, npix_max = 78, mask sum = 72, frac = 0.917
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 17.10"
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27.csv
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27.csv
[Tue May 15 06:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May 15 06:48:26 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly