[Mon May  7 11:52:36 2012] Detection parameters:
  Position = (312.2, 349.1) = 14 40 32.83 -62 33 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15695.5 +/- 159.1
  Background counts = 882.2
  Rate = 0.3 +/- 0.003

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 3.81'
[Mon May  7 12:38:04 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Mon May  7 12:38:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.900
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.33"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24.csv
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24.csv
[Thu May 10 23:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu May 10 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu May 10 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 10 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:03:27 2012] Warning, spatial fit 24 centroid is now closest to src. 31
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:03:29 2012] Source is confused with source 23
[Sat May 12 23:06:09 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sat May 12 23:06:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.900
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.33"
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24.csv
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24.csv
[Tue May 15 06:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 15 06:48:26 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 15 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 15 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes