[Mon May  7 11:52:35 2012] Detection parameters:
  Position = (331.9, 268.0) = 14 40 20.31 -62 39 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17786.9 +/- 173.0
  Background counts = 499.9
  Rate = 0.3 +/- 0.003

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 3.28'
[Mon May  7 12:38:04 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Mon May  7 12:38:04 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.07"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19.csv
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19.csv
[Thu May 10 23:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 10 23:27:29 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat May 12 23:03:27 2012] Spatial fit model total counts = 93265.600000, observed total counts = 101295.000000
[Sat May 12 23:03:27 2012] Offset between fit and detection position for source 19 = 5.492935 pixels
[Sat May 12 23:03:27 2012] 82497.800000 total counts/ 25600.000000 bgd. counts: snr = 355.611250
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.492935 pixels
  Position = (327.9, 271.7) = 14 40 22.89 -62 39 25.2
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 56897.8 +/- 287.2
  Background counts = 25600.0
  Rate = 0.8 +/- 0.004
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:03:29 2012] Source is confused with source 17
[Sat May 12 23:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 16.14"
[Sat May 12 23:06:09 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.015
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 16.14"
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19.csv
[Tue May 15 06:48:23 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19.csv
[Tue May 15 06:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:25 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue May 15 06:48:25 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue May 15 06:48:25 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly