[Mon May  7 11:52:33 2012] Detection parameters:
  Position = (224.9, 208.0) = 14 41 27.99 -62 44 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15444.1 +/- 164.7
  Background counts = 840.9
  Rate = 0.2 +/- 0.002

[Mon May  7 11:53:32 2012] Off-axis axis estimate = 8.45'
[Mon May  7 12:38:04 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:38:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 12:38:04 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Mon May  7 12:38:04 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Mon May  7 12:38:04 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.65"
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11.csv
[Thu May 10 23:27:27 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 10 23:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11.csv
[Thu May 10 23:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 10 23:27:29 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 10 23:27:29 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat May 12 23:03:26 2012] Spatial fit model total counts = 59349.600000, observed total counts = 59437.000000
[Sat May 12 23:03:26 2012] Offset between fit and detection position for source 11 = 0.703939 pixels
[Sat May 12 23:03:26 2012] 54834.500000 total counts/ 25600.000000 bgd. counts: snr = 182.715625
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.703939 pixels
  Position = (225.3, 208.5) = 14 41 27.73 -62 43 59.4
  Extent = 20.2 (19.8-20.6)", rotation angle = 0
  Source counts = 29234.5 +/- 234.2
  Background counts = 25600.0
  Rate = 0.4 +/- 0.003
[Sat May 12 23:03:29 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:03:29 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:03:29 2012] Source does appear to be extended
[Sat May 12 23:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:03:29 2012] Source is confused with source 12
[Sat May 12 23:03:29 2012] Source is confused with source 21
[Sat May 12 23:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 12 23:06:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 12 23:06:09 2012] Initial guess for spatial extent in simple fitting = 20.21"
[Sat May 12 23:06:09 2012] source mask rpix=4.6, npix_max = 105, mask sum = 110, frac = 1.039
[Sat May 12 23:06:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 20.21"
[Tue May 15 06:48:22 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 15 06:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11.csv
[Tue May 15 06:48:22 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 15 06:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11.csv
[Tue May 15 06:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 06:48:25 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 15 06:48:25 2012] fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 15 06:48:25 2012] Fit fullrun_pn_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly