[Mon May  7 11:54:40 2012] Detection parameters:
  Position = (296.3, 468.0) = 14 40 42.77 -62 25 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 973.9 +/- 46.2
  Background counts = 179.2
  Rate = 0.01 +/- 0.0006

[Mon May  7 11:55:32 2012] Off-axis axis estimate = 12.29'
[Sat May 12 06:21:54 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 12 06:21:54 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat May 12 06:21:54 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.913
[Sat May 12 06:21:54 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 12.58"
[Sat May 12 23:02:37 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78.ximg exists
[Sat May 12 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78.csv
[Sat May 12 23:02:37 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78_1.ximg exists
[Sat May 12 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78.csv
[Sat May 12 23:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:40 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Sat May 12 23:02:40 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Sat May 12 23:02:40 2012] Fit fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Sat May 12 23:04:39 2012] Spatial fit model total counts = 7487.810000, observed total counts = 7476.000000
[Sat May 12 23:04:39 2012] Offset between fit and detection position for source 47 = 1.851169 pixels
[Sat May 12 23:04:39 2012] Warning, changing simple spatial fit ID from 78 to 63
[Sat May 12 23:04:39 2012] 6982.420000 total counts/ 3816.900000 bgd. counts: snr = 51.237705
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.851169 pixels
  Position = (294.5, 467.9) = 14 40 43.93 -62 25 11.6
  Extent = 24.7 (24.7-24.7)", rotation angle = 0
  Source counts = 3165.5 +/- 83.6
  Background counts = 3816.9
  Rate = 0.04 +/- 0.001
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:40 2012] Source is confused with source 43
[Wed May 16 15:23:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 24.71"
[Wed May 16 15:23:07 2012] source mask rpix=5.7, npix_max = 152, mask sum = 156, frac = 1.021
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 24.71"