[Mon May  7 11:54:38 2012] Detection parameters:
  Position = (307.2, 429.0) = 14 40 35.93 -62 28 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1408.8 +/- 52.9
  Background counts = 228.5
  Rate = 0.02 +/- 0.0007

[Mon May  7 11:55:31 2012] Off-axis axis estimate = 9.49'
[Sat May 12 06:21:54 2012] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 12 06:21:54 2012] Initial guess for spatial extent in simple fitting = 11.17"
[Sat May 12 06:21:54 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.956
[Sat May 12 06:21:54 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 11.17"
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54.csv
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54_1.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54.csv
[Sat May 12 23:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:39 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sat May 12 23:02:39 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sat May 12 23:02:39 2012] Fit fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sat May 12 23:04:39 2012] Warning, spatial fit 54 centroid is now closest to src. 40
[Sat May 12 23:04:39 2012] Spatial fit model total counts = 10435.300000, observed total counts = 10424.000000
[Sat May 12 23:04:39 2012] Offset between fit and detection position for source 39 = 1.836854 pixels
[Sat May 12 23:04:39 2012] Warning, changing simple spatial fit ID from 54 to 67
[Sat May 12 23:04:39 2012] 9782.830000 total counts/ 7145.500000 bgd. counts: snr = 31.199538
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.836854 pixels
  Position = (308.1, 430.6) = 14 40 35.40 -62 27 53.7
  Extent = 21.9 (21.8-21.9)", rotation angle = 0
  Source counts = 2637.3 +/- 98.9
  Background counts = 7145.5
  Rate = 0.04 +/- 0.001
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:40 2012] Source is confused with source 38
[Wed May 16 15:23:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 21.89"
[Wed May 16 15:23:07 2012] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.988
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 21.89"