[Mon May  7 11:54:37 2012] Detection parameters:
  Position = (224.9, 208.0) = 14 41 27.98 -62 44 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3911.9 +/- 84.8
  Background counts = 386.2
  Rate = 0.05 +/- 0.001

[Mon May  7 11:55:31 2012] Off-axis axis estimate = 8.45'
[Sat May 12 06:21:53 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 12 06:21:53 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Sat May 12 06:21:53 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Sat May 12 06:21:53 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.65"
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28.csv
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28.csv
[Sat May 12 23:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat May 12 23:02:38 2012] Fit fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat May 12 23:04:38 2012] Warning, spatial fit 28 centroid is now closest to src. 33
[Sat May 12 23:04:40 2012] Source 32 is offset by 1.334741 and -9.430071 pixels which is larger than
2 X fitted extent = 1.201439 x 1.201439, not incorporating fit results
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:40 2012] Source is confused with source 34
[Wed May 16 15:23:07 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Wed May 16 15:23:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 10.65"