[Mon May  7 11:54:36 2012] Detection parameters:
  Position = (302.8, 235.2) = 14 40 38.73 -62 42 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4572.4 +/- 86.1
  Background counts = 474.6
  Rate = 0.09 +/- 0.002

[Mon May  7 11:55:31 2012] Off-axis axis estimate = 4.59'
[Sat May 12 06:21:53 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:53 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Sat May 12 06:21:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.916
[Sat May 12 06:21:53 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.73"
[Sat May 12 23:02:35 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 12 23:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18.csv
[Sat May 12 23:02:35 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 12 23:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18.csv
[Sat May 12 23:02:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 12 23:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:04:38 2012] Warning, spatial fit 18 centroid is now closest to src. 27
[Sat May 12 23:04:39 2012] Spatial fit model total counts = 9245.130000, observed total counts = 9296.000000
[Sat May 12 23:04:39 2012] Offset between fit and detection position for source 30 = 3.880082 pixels
[Sat May 12 23:04:39 2012] Warning, changing simple spatial fit ID from 18 to 76
[Sat May 12 23:04:39 2012] 9123.561000 total counts/ 8468.380000 bgd. counts: snr = 7.119691
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.880082 pixels
  Position = (299.3, 233.4) = 14 40 40.90 -62 42 11.7
  Extent = 9.9 (8.8-11.3)", rotation angle = 0
  Source counts = 655.2 +/- 95.5
  Background counts = 8468.4
  Rate = 0.009 +/- 0.001
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 15:23:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Wed May 16 15:23:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.815
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 9.87"