[Mon May  7 11:54:35 2012] Detection parameters:
  Position = (326.0, 252.1) = 14 40 24.06 -62 40 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3179.0 +/- 76.5
  Background counts = 330.6
  Rate = 0.06 +/- 0.001

[Mon May  7 11:55:31 2012] Off-axis axis estimate = 3.91'
[Sat May 12 06:21:53 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:53 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Sat May 12 06:21:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.679
[Sat May 12 06:21:53 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.38"
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27.csv
[Sat May 12 23:02:36 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat May 12 23:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27.csv
[Sat May 12 23:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat May 12 23:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:04:38 2012] Spatial fit model total counts = 26696.800000, observed total counts = 20808.000000
[Sat May 12 23:04:38 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:40 2012] Source is confused with source 24
[Wed May 16 15:23:07 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Wed May 16 15:23:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.679
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.38"